Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

http: // www.ijesrt.com

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखक:	Arias-Nava, Elias H.
अन्य लेखक:	Valles Rosales, Delia Julieta, Diaz Mendoza, Juan Miguel, Rodriguez Picon, Luis Alberto, Mendez Gonzalez, Luis Carlos
स्वरूप:	Artículo de divulgación
भाषा:	en_US
प्रकाशित:	IJESRT 2018
विषय:	3D printing · additive manufacturing · fuse deposition modeling · mechanical properties · wood plastic composites info:eu-repo/classification/cti/7
ऑनलाइन पहुंच:	https://doi.org/10.5281/zenodo.1247027 http: // www.ijesrt.com
टैग :	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
द्वारा: Arias-Nava, Elias H.
प्रकाशित: (2018)

Additive manufacturing: Fused deposition modeling advances
द्वारा: Aguilar Duque, Julian Israel
प्रकाशित: (2018)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
द्वारा: Rosel-Solis, Manuel-Javier
प्रकाशित: (2019)

Torsion analysis of the anisotropic behavior of FDM technology
द्वारा: Balderrama Armendariz, Cesar Omar
प्रकाशित: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
द्वारा: Balderrama Armendariz, Cesar Omar
प्रकाशित: (2019)

Geometric considerations for the 3D printing of components using fused filament fabrication
प्रकाशित: (2020)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
प्रकाशित: (2021)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
प्रकाशित: (2020)

Evaluation of Mechanical and Thermophysical Properties of Chitosan/Poly(DL-Lactide-co-Glycolide)/Multiwalled Carbon Nanotubes for Tissue Engineering
द्वारा: olivas, imelda, और अन्य
प्रकाशित: (2017)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
द्वारा: Castro Carmona, Javier Servando
प्रकाशित: (2020)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
प्रकाशित: (2022)

Analysis of mechanical and electrical imperfect contacts in piezoelectric composites
द्वारा: López Realpozo, Juan Carlos
प्रकाशित: (2018)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
द्वारा: Flores‑Hernández, Cynthia G.
प्रकाशित: (2018)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
प्रकाशित: (2021)

Interphase effect on the effective magneto-electro-elastic properties for three-phase fib er-reinforce d composites by a semi-analytical approach
प्रकाशित: (2020)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
प्रकाशित: (2021)

Semi-analytic finite element method applied to short-fiber-reinforced piezoelectric composites
प्रकाशित: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
द्वारा: Maximino Matus Ruiz
प्रकाशित: (2023)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
द्वारा: Garza-Hernández, R.
प्रकाशित: (2019)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
प्रकाशित: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
प्रकाशित: (2020)

Effective properties of centro-symmetric micropolar composites with non-uniform imperfect contact conditions
प्रकाशित: (2023)

Influence of post‑deposition annealing on the chemical states of crystalline tantalum pentoxide films
द्वारा: Perez, Israel
प्रकाशित: (2018)

Scorpion venoms and associated toxins as anticancer agents: update on their application and mechanism of action.
द्वारा: Rivas Caceres, Raymundo Rene
प्रकाशित: (2020)

Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution
द्वारा: Piña Monarrez, Manuel Román
प्रकाशित: (2020)

Haptic Sensation of Physical Properties in an Augmented Reality Environment.
द्वारा: Rodríguez Ramírez, Alma Guadalupe
प्रकाशित: (2020)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
द्वारा: Universidad Autónoma de Ciudad Juárez, और अन्य
प्रकाशित: (2023)

Determination of the Chemical Composition of Lithium Niobate Powders
द्वारा: Sanchez Dena, Oswaldo
प्रकाशित: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
द्वारा: Mota , Maria de la Luz
प्रकाशित: (2019)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
प्रकाशित: (2020)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
द्वारा: Valero Galván, José
प्रकाशित: (2018)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
द्वारा: Becerril-Silva, M.
प्रकाशित: (2018)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
द्वारा: Olivas Armendariz, Imelda
प्रकाशित: (2022)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
प्रकाशित: (2020)

Antimicrobial and Substantivity Properties of Silver Nanoparticles against Oral Microbiomes Clinically Isolated from Young and Young-Adult Patients
द्वारा: Espinosa Cristobal, Leon Francisco
प्रकाशित: (2019)

Brosimum alicastrum Sw. (Ramón): An Alternative to Improve the Nutritional Properties and Functional Potential of the Wheat Flour Tortilla
द्वारा: Subiria-Cueto, Rodrigo
प्रकाशित: (2019)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
प्रकाशित: (2021)

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite
प्रकाशित: (2022)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
द्वारा: Rangel Peniche, Diana Beatriz
प्रकाशित: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
द्वारा: Núñez-Gastélum, José Alberto
प्रकाशित: (2018)