Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

http: // www.ijesrt.com

Gorde:

Xehetasun bibliografikoak
Egile nagusia:	Arias-Nava, Elias H.
Beste egile batzuk:	Valles Rosales, Delia Julieta, Diaz Mendoza, Juan Miguel, Rodriguez Picon, Luis Alberto, Mendez Gonzalez, Luis Carlos
Formatua:	Artículo de divulgación
Hizkuntza:	en_US
Argitaratua:	IJESRT 2018
Gaiak:	3D printing · additive manufacturing · fuse deposition modeling · mechanical properties · wood plastic composites info:eu-repo/classification/cti/7
Sarrera elektronikoa:	https://doi.org/10.5281/zenodo.1247027 http: // www.ijesrt.com
Etiketak:	Etiketa erantsi Etiketarik gabe, Izan zaitez lehena erregistro honi etiketa jartzen!

Antzeko izenburuak

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
nork: Arias-Nava, Elias H.
Argitaratua: (2018)

Additive manufacturing: Fused deposition modeling advances
nork: Aguilar Duque, Julian Israel
Argitaratua: (2018)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
nork: Rosel-Solis, Manuel-Javier
Argitaratua: (2019)

Torsion analysis of the anisotropic behavior of FDM technology
nork: Balderrama Armendariz, Cesar Omar
Argitaratua: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
nork: Balderrama Armendariz, Cesar Omar
Argitaratua: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Argitaratua: (2020)

Geometric considerations for the 3D printing of components using fused filament fabrication
Argitaratua: (2020)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Argitaratua: (2021)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
nork: Castro Carmona, Javier Servando
Argitaratua: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
nork: Maximino Matus Ruiz
Argitaratua: (2023)

Analysis of mechanical and electrical imperfect contacts in piezoelectric composites
nork: López Realpozo, Juan Carlos
Argitaratua: (2018)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Argitaratua: (2021)

Antibacterial Properties of Grape Seed Extract-Enriched Cellulose Hydrogels for Potential Dental Application: In Vitro Assay, Cytocompatibility, and Biocompatibility
nork: Tovar Carrillo, Karla Lizette
Argitaratua: (2024)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Argitaratua: (2022)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
nork: Flores‑Hernández, Cynthia G.
Argitaratua: (2018)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Argitaratua: (2021)

Interphase effect on the effective magneto-electro-elastic properties for three-phase fib er-reinforce d composites by a semi-analytical approach
Argitaratua: (2020)

Semi-analytic finite element method applied to short-fiber-reinforced piezoelectric composites
Argitaratua: (2021)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Argitaratua: (2021)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
nork: Garza-Hernández, R.
Argitaratua: (2019)

Self-locking module for automatic tool change
nork: Dr. Carlos Sánchez López, et al.
Argitaratua: (2024)

Evaluation of the plastic injection machine maintenance system through the TOPSIS method
nork: Calvillo, Jesús Manuel
Argitaratua: (2019)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Argitaratua: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Argitaratua: (2020)

Determination of the life cycle of electrical fuses: 7CP24-17
nork: Omar Rosales Rivera, et al.
Argitaratua: (2024)

Influence of post‑deposition annealing on the chemical states of crystalline tantalum pentoxide films
nork: Perez, Israel
Argitaratua: (2018)

Scorpion venoms and associated toxins as anticancer agents: update on their application and mechanism of action.
nork: Rivas Caceres, Raymundo Rene
Argitaratua: (2020)

Determination of the Chemical Composition of Lithium Niobate Powders
nork: Sanchez Dena, Oswaldo
Argitaratua: (2019)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
nork: Universidad Autónoma de Ciudad Juárez, et al.
Argitaratua: (2023)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
nork: Mota , Maria de la Luz
Argitaratua: (2019)

Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution
nork: Piña Monarrez, Manuel Román
Argitaratua: (2020)

Effective properties of centro-symmetric micropolar composites with non-uniform imperfect contact conditions
Argitaratua: (2023)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Argitaratua: (2020)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
nork: Valero Galván, José
Argitaratua: (2018)

Articulated mechanism in aerial robots for cargo transport: 7CP24-23
nork: Héctor Aarón Mani Lazos, et al.
Argitaratua: (2024)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
nork: Becerril-Silva, M.
Argitaratua: (2018)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
nork: Olivas Armendariz, Imelda
Argitaratua: (2022)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Argitaratua: (2020)

Haptic Sensation of Physical Properties in an Augmented Reality Environment.
nork: Rodríguez Ramírez, Alma Guadalupe
Argitaratua: (2020)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
nork: Rangel Peniche, Diana Beatriz
Argitaratua: (2018)