Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

http: // www.ijesrt.com

Kaydedildi:

Detaylı Bibliyografya
Yazar:	Arias-Nava, Elias H.
Diğer Yazarlar:	Valles Rosales, Delia Julieta, Diaz Mendoza, Juan Miguel, Rodriguez Picon, Luis Alberto, Mendez Gonzalez, Luis Carlos
Materyal Türü:	Artículo de divulgación
Dil:	en_US
Baskı/Yayın Bilgisi:	IJESRT 2018
Konular:	3D printing · additive manufacturing · fuse deposition modeling · mechanical properties · wood plastic composites info:eu-repo/classification/cti/7
Online Erişim:	https://doi.org/10.5281/zenodo.1247027 http: // www.ijesrt.com
Etiketler:	Etiketle Etiket eklenmemiş, İlk siz ekleyin!

Benzer Materyaller

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Yazar:: Arias-Nava, Elias H.
Baskı/Yayın Bilgisi: (2018)

Additive manufacturing: Fused deposition modeling advances
Yazar:: Aguilar Duque, Julian Israel
Baskı/Yayın Bilgisi: (2018)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
Yazar:: Rosel-Solis, Manuel-Javier
Baskı/Yayın Bilgisi: (2019)

Torsion analysis of the anisotropic behavior of FDM technology
Yazar:: Balderrama Armendariz, Cesar Omar
Baskı/Yayın Bilgisi: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
Yazar:: Balderrama Armendariz, Cesar Omar
Baskı/Yayın Bilgisi: (2019)

Geometric considerations for the 3D printing of components using fused filament fabrication
Baskı/Yayın Bilgisi: (2020)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Baskı/Yayın Bilgisi: (2021)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Baskı/Yayın Bilgisi: (2020)

Evaluation of Mechanical and Thermophysical Properties of Chitosan/Poly(DL-Lactide-co-Glycolide)/Multiwalled Carbon Nanotubes for Tissue Engineering
Yazar:: olivas, imelda, ve diğerleri
Baskı/Yayın Bilgisi: (2017)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
Yazar:: Castro Carmona, Javier Servando
Baskı/Yayın Bilgisi: (2020)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Baskı/Yayın Bilgisi: (2022)

Analysis of mechanical and electrical imperfect contacts in piezoelectric composites
Yazar:: López Realpozo, Juan Carlos
Baskı/Yayın Bilgisi: (2018)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
Yazar:: Flores‑Hernández, Cynthia G.
Baskı/Yayın Bilgisi: (2018)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Baskı/Yayın Bilgisi: (2021)

Interphase effect on the effective magneto-electro-elastic properties for three-phase fib er-reinforce d composites by a semi-analytical approach
Baskı/Yayın Bilgisi: (2020)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Baskı/Yayın Bilgisi: (2021)

Semi-analytic finite element method applied to short-fiber-reinforced piezoelectric composites
Baskı/Yayın Bilgisi: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
Yazar:: Maximino Matus Ruiz
Baskı/Yayın Bilgisi: (2023)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
Yazar:: Garza-Hernández, R.
Baskı/Yayın Bilgisi: (2019)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Baskı/Yayın Bilgisi: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Baskı/Yayın Bilgisi: (2020)

Effective properties of centro-symmetric micropolar composites with non-uniform imperfect contact conditions
Baskı/Yayın Bilgisi: (2023)

Influence of post‑deposition annealing on the chemical states of crystalline tantalum pentoxide films
Yazar:: Perez, Israel
Baskı/Yayın Bilgisi: (2018)

Scorpion venoms and associated toxins as anticancer agents: update on their application and mechanism of action.
Yazar:: Rivas Caceres, Raymundo Rene
Baskı/Yayın Bilgisi: (2020)

Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution
Yazar:: Piña Monarrez, Manuel Román
Baskı/Yayın Bilgisi: (2020)

Haptic Sensation of Physical Properties in an Augmented Reality Environment.
Yazar:: Rodríguez Ramírez, Alma Guadalupe
Baskı/Yayın Bilgisi: (2020)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
Yazar:: Universidad Autónoma de Ciudad Juárez, ve diğerleri
Baskı/Yayın Bilgisi: (2023)

Determination of the Chemical Composition of Lithium Niobate Powders
Yazar:: Sanchez Dena, Oswaldo
Baskı/Yayın Bilgisi: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
Yazar:: Mota , Maria de la Luz
Baskı/Yayın Bilgisi: (2019)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Baskı/Yayın Bilgisi: (2020)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
Yazar:: Valero Galván, José
Baskı/Yayın Bilgisi: (2018)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
Yazar:: Becerril-Silva, M.
Baskı/Yayın Bilgisi: (2018)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
Yazar:: Olivas Armendariz, Imelda
Baskı/Yayın Bilgisi: (2022)

Antimicrobial and Substantivity Properties of Silver Nanoparticles against Oral Microbiomes Clinically Isolated from Young and Young-Adult Patients
Yazar:: Espinosa Cristobal, Leon Francisco
Baskı/Yayın Bilgisi: (2019)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Baskı/Yayın Bilgisi: (2020)

Brosimum alicastrum Sw. (Ramón): An Alternative to Improve the Nutritional Properties and Functional Potential of the Wheat Flour Tortilla
Yazar:: Subiria-Cueto, Rodrigo
Baskı/Yayın Bilgisi: (2019)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Baskı/Yayın Bilgisi: (2021)

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite
Baskı/Yayın Bilgisi: (2022)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
Yazar:: Rangel Peniche, Diana Beatriz
Baskı/Yayın Bilgisi: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
Yazar:: Núñez-Gastélum, José Alberto
Baskı/Yayın Bilgisi: (2018)