An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes

In the present work, fabrication of metal matrix composite of aluminium alloy A380 reinforced with 0.5, 1 and 1.5 weight percentages of nano boron carbide through mechanical stirring and ultrasonic treatment processes. Scanning Electron Microscopy (SEM), Back Scattered Electron Detector (BSE) and en...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Andre forfattere:	Singh, Jaivir, Alba-Baena, Noé, sharma, vishal, Trehan, Rajeev
Format:	Artículo
Sprog:	English
Udgivet:	2021
Fag:	nanocomposites Aluminium A380 Boron Carbide Ultrasonic Treatment Mechanical Stirring Wear info:eu-repo/classification/cti/7
Online adgang:	https://doi.org/10.1007/s12046-021-01760-8 https://link.springer.com/article/10.1007/s12046-021-01760-8#citeas
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Electronic states and metallic character of carbide Co/MoS2 catalytic interface
Udgivet: (2021)

Polyestyrene and low density polyethylene oregano’s essential oil functionalization for possible antimicrobial active packaging applications
af: Díaz-Acosta, Edgar
Udgivet: (2018)

1. Modeling electrochemical impedance spectroscopy results of Cu andThiosemicarbizide−Boron Nitride nano-sheets electrodes in 3.5wt% NaCl solution, based on an electrochemical reaction mechanism
Udgivet: (2023)

Study of the Influence of the Molecular Weight of the Polymer Used as a Coating on Magnetite Nanoparticles
af: Chapa, Christian
Udgivet: (2018)

Turbulent cylinder-stirred flow heat and momentum transfer research in batch operated single-phase square reactor
Udgivet: (2022)

Influence of Rare Earths Additions on the Microstructure and Hardness of Heat-treated Nanostructured Superalloy Inconel 718
Udgivet: (2022)

Polyestyrene and Low Density Polyethylene Oregano´s Essential Oil Functionalization for Possible Antimicrobial Active Packaging Applications
af: Díaz-Acosta, Edgar
Udgivet: (2018)

Pancreatic Cancer Treatment by Nab-Paclitaxel with Gemcitabine Combination
af: Chapa, Christian
Udgivet: (2022)

pH-responsive polymer micelles for methotrexate delivery at tumor microenvironments
af: Castro Carmona, Javier Servando
Udgivet: (2020)

Equilibrium, kinetic and optimization studies for the adsorption of tartrazine in water onto activated carbon from pecan nut shells
af: Torres-Pérez, Jonatan
Udgivet: (2018)

INITIAL SEED WEIGHT AND SCARIFICATION AFFECT in vitro GERMINATION OF Echinocactus parryi (Engelm.) Gg EL PESO INICIAL DE SEMILLAS Y LA ESCARIFICACIÓN AFECTAN LA GERMINACIÓN in vitro DE Echinocactus parryi (Engelm.)
af: Osuna Avila, Pedro
Udgivet: (2022)

Comparison between Allura Red dye discoloration by activated carbon and azo bacteria strain
Udgivet: (2020)

Scorpion venoms and associated toxins as anticancer agents: update on their application and mechanism of action.
af: Rivas Caceres, Raymundo Rene
Udgivet: (2020)

Nueva metodología para el análisis de sistemas mecánicos utilizando modelos a escala y leyes de similitud
af: Mariaca, Yahir De Jesus
Udgivet: (2018)

Stress-Based Weibull Method to Select a Ball Bearing and Determine Its Actual Reliability
af: Piña Monarrez, Manuel Román
Udgivet: (2020)

Antiadherence and Antimicrobial Properties of Silver Nanoparticles against Streptococcus mutans on Brackets and Wires Used for Orthodontic Treatments
af: Espinosa Cristóbal, León Francisco
Udgivet: (2018)

Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution
af: Piña Monarrez, Manuel Román
Udgivet: (2020)

Transitional points in constructing the preimage concept in linear algebra
Udgivet: (2021)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
af: Arias-Nava, Elias H.
Udgivet: (2018)

Weibull Reliability Methodology for Ball Bearing Design Based on Hertz Stress With Focus on Industry 4.0
Udgivet: (2021)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
af: Arias-Nava, Elias H.
Udgivet: (2018)

The Squirrel-Cage Induction Motor Model and Its Parameter Identification Via Steady and Dynamic Tests
af: Morfin, Onofre
Udgivet: (2018)

Physicochemical properties of chitosan–magnetite nanocomposites obtained with different pH
af: Chapa, Christian
Udgivet: (2021)

Los convenios interinstitucionales: mecanismos de colaboración para crear impacto social en la comunidad universitaria
af: Dra. Rosa María Cuellar Gutiérrez, et al.
Udgivet: (2023)

Structural and magnetic behavior of oxidized and reduced fe doped LiNbO3 powders
af: Fierro-Ruiz, César D.
Udgivet: (2018)

Radial Basis Function Neural Network for the Evaluation of Image Color Quality Shown on Liquid Crystal Displays
Udgivet: (2021)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
af: Morelia De los Santos, et al.
Udgivet: (2023)

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite
Udgivet: (2022)

Unidad de Cirugía Experimental.
af: Universidad Autónoma de Ciudad Juárez
Udgivet: (2016)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
af: Balderrama Armendariz, Cesar Omar
Udgivet: (2019)

Presentación del Curso Diseño Experimental.
af: Universidad Autónoma de Ciudad Juárez, et al.
Udgivet: (2017)

Geometric considerations for the 3D printing of components using fused filament fabrication
Udgivet: (2020)

Two loads of wood worth 75 /

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Udgivet: (2020)

Análisis experimental de un dispositivo tope de impacto como atenuador de vibraciones en banco experimental
af: Luis Alberto Baltazar Tadeo, et al.
Udgivet: (2023)

An experimental approach to discrete dynamical systems with Mathematica
af: Michael Rojas Romero
Udgivet: (2021)

Evaluation of Mechanical and Thermophysical Properties of Chitosan/Poly(DL-Lactide-co-Glycolide)/Multiwalled Carbon Nanotubes for Tissue Engineering
af: olivas, imelda, et al.
Udgivet: (2017)

Taller de plástica experimental para invidentes "Manos Mágicas"
af: María Teresa Villarreal Fuentes, et al.
Udgivet: (2017)

The gradual transformation of agricultural property in the metropolitan zone of Mexicali from 1990 to 2018 The role of this property in the urban expansion
af: Herman Barrera Mejía, et al.
Udgivet: (2020)

Metric for two unequal extreme Kerr-Newman black holes
af: Cabrera Munguia, Roberto Ivan
Udgivet: (2022)