Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Fused Filament Fabrication is an Additive Manufacturing technology that is continuously improving its technologies. The present research exposes the use of the Travel Salesman Problem and Nearest Neighbor Algorithm as a strategy to reduce the time need to print slots shield in a Printed Circuit Boar...

Shranjeno v:

Bibliografske podrobnosti
Drugi avtorji:	Aguilar Duque, Julián Israel, Avelar, Liliana, Balderrama Armendariz, Cesar Omar, Hernandez Arellano, Juan Luis
Format:	Artículo
Jezik:	en_US
Izdano:	2020
Teme:	Fused Filament Fabrication Travel Salesman Problem Nearest Neighbor Algorithm time reduction process PCB board. info:eu-repo/classification/cti/7
Online dostop:	https://www.ijcopi.org/ojs/article/view/156
Oznake:	Označite Brez oznak, prvi označite!

Podobne knjige/članki

Geometric considerations for the 3D printing of components using fused filament fabrication
Izdano: (2020)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Izdano: (2021)

Trend Boards. Nuevas Tendencias en el Diseño de Interiores
od: Licenciatura en Diseño de Interiores, Instituto de Arquitectura, Diseño y Arte
Izdano: (2017)

Using Regression Models for Predicting the Product Quality in a Tubing Extrusion Process
od: Garcia, Vicente
Izdano: (2019)

Additive manufacturing: Fused deposition modeling advances
od: Aguilar Duque, Julian Israel
Izdano: (2018)

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing
od: Balderrama Armendariz, Cesar Omar
Izdano: (2024)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Izdano: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Izdano: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
od: Balderrama Armendariz, Cesar Omar
Izdano: (2019)

Determination of the life cycle of electrical fuses: 7CP24-17
od: Omar Rosales Rivera, et al.
Izdano: (2024)

A regression model based on the nearest centroid neighborhood
od: Garcia, Vicente
Izdano: (2018)

Torsion analysis of the anisotropic behavior of FDM technology
od: Balderrama Armendariz, Cesar Omar
Izdano: (2018)

From bululú to varieté. Approach to the travelling theaters (repertory and varieties) in the twentieth-century Spain
od: Juan José Montijano Ruiz
Izdano: (2021)

Implementation of Kaizen methodology to solve problems in the supply chain: 7CP24-36
od: Ing. Luis Fernando Peñúñuri Trejo, et al.
Izdano: (2024)

Success factors to promote the effectiveness of Circular Economy 4.0 of the industrial sector in plastic manufacturers at Ciudad Juárez
od: Francisco Arturo Bribiescas Silva, et al.
Izdano: (2024)

“Reducción del tiempo de impresión en impresora 3D que utiliza tecnología de deposición de filamento fundido”
od: Ramos Lozano, Secundino
Izdano: (2020)

Metaheuristics for Order Picking Optimisation: A Comparison Among Three Swarm-Intelligence Algorithms
od: Rivera Zarate, Gilberto
Izdano: (2021)

Reducción de desperdicio en proceso de fabricación de faro automotriz
od: M. C. Fuentes, et al.
Izdano: (2021)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
od: Rosel-Solis, Manuel-Javier
Izdano: (2019)

Development of a semi-automated induction soldering workstation: 7CP24-20
od: Ing. Alma Nayeli Balcázar Terrones, et al.
Izdano: (2024)

Porous bioactive TPU system fabricated by 3D printing, containing Lavandula angustifolia essential oil and neomycin for the regeneration of diabetic foot wounds: 9CP25-18
od: Jazmín Arely Piña González, et al.
Izdano: (2025)

Reduction of Setup Times in a Metal Fabrication Company Using a Lean-Sigma Approach
Izdano: (2024)

In-circuit electrical test system with direct interface and machine learning algorithms : 9CP25-4
od: Geu Misael Puentes, et al.
Izdano: (2025)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
od: Morelia De los Santos, et al.
Izdano: (2023)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
od: Universidad Autónoma de Ciudad Juárez, et al.
Izdano: (2023)

Conferencia (WEBINAR) Conversatorios de Gestión del Talento 2023 (La importancia del Global OnBoarding ).
od: Departamento Ciencias Administrativas, et al.
Izdano: (2023)

La necesidad de pre-prints en las ciencias jurídicas
od: Nava, Wendolyne
Izdano: (2021)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Izdano: (2022)

Sistema de visión industrial para piezas en procesos con dispositivo móvil o single board computer: Revisión de literatura
od: Alanís Pérez, Arturo Heriberto
Izdano: (2018)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
od: Maximino Matus Ruiz
Izdano: (2023)

Evaluation of adjustable functionality and mechanical properties of a transradial mechanical prosthesis for 3D printing
od: Paola Lizeth Orquiz Avila, et al.
Izdano: (2024)

A Hierarchical Axiomatic Evaluation of Additive Manufacturing Equipment and the 3D Printing Process Based on Sustainability and Human Factors
Izdano: (2024)

Proposal Fabrication of Heterostructures for Dual Detection of Insulin and Glucose for Timely Monitoring in Diabetic Patients Based on Thin Films of Chalcogenides and Bioceramics
od: Amanda Carrillo Castillo
Izdano: (2024)

Computational model of the 3D printing process by extrusion of complex 3D constructs of the gelatin/siloxane material: 9CP25-6
od: Marcos Bryan Valenzuela Reyes, et al.
Izdano: (2025)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Izdano: (2021)

Precise Definition of a “Monolayer Point” in Polymer Brush Films for Fabricating Highly Coherent TiO2 Thin Films by Vapor-Phase Infiltration
Izdano: (2020)

3D printed TPU mesh system with Lavandula angustifolia essential oil and neomycin for diabetic foot wound regeneration: 7CP24-30
od: Jazmín Arely Piña González, et al.
Izdano: (2024)

Solvent- and Catalyst-Free One-Pot Green Bound-Type Fused Bis-Heterocycles Synthesis via Groebke–Blackburn–Bienaymé Reaction/SNAr/Ring-Chain Azido-Tautomerization Strategy
od: Gámez-Montaño, Rocio
Izdano: (2018)

Reduction of Stresses and Mass of an Engine Rubber Mount Subject to Mechanical Vibrations
od: Davalos Ramirez, Jose Omar
Izdano: (2021)

Stress concentration reduction in an axially loaded rectangular bar with an elliptical hole
od: José Alfredo Ramírez Monares, et al.
Izdano: (2023)