Impact of carbon nanotubes in a CrFeMnNiTi alloy proposed as a potential candidate for stainless-steel substitution

Impact of carbon nanotubes in a CrFeMnNiTi alloy proposed as a potential candidate for stainless-steel substitution

In the steel industry, the fabrication of sintered products includes the use of graphite as an alloying element and lubricant. This study explores the idea that a sintered alloy with increased properties can be produced substituting graphite by carbon nanotubes. Also, the microstructural characteris...

Mô tả đầy đủ

Đã lưu trong:

Chi tiết về thư mục
Tác giả chính:	Hernandez Castro, Z
Tác giả khác:	Lardizabal Gutierrez, D, Torres Garcia, A, Rodriguez Gonzalez, Claudia, Estrada Guel, I, Martínez Sánchez, Roberto, Gomez Eparza, Cynthia
Định dạng:	Artículo
Ngôn ngữ:	English
Được phát hành:	2019
Những chủ đề:	Carbon nanotubesHardnessPowder technologySintering info:eu-repo/classification/cti/7
Truy cập trực tuyến:	https://www.sciencedirect.com/science/article/abs/pii/S0167577X19310262?via%3Dihub
Các nhãn:	Thêm thẻ Không có thẻ, Là người đầu tiên thẻ bản ghi này!

Những quyển sách tương tự

Recovery of residual polyamide (PA12) from polymer powder bed fusion additive manufacturing process through a binder jetting process
Bằng: Balderrama Armendariz, Cesar Omar
Được phát hành: (2024)

Influence of Sintering Temperature on AlCoCrFeNiMo(Tix, x=0,1) High Entropy Alloys
Bằng: Baldenebro-Lopez, Francisco
Được phát hành: (2018)

Corrosion assessment of Zn-rich epoxy primers with carbon nanotube additions in an electrolyte with a bacteria consortium
Bằng: Castañeda López, Homero
Được phát hành: (2019)

Influence of microbial adherence on corrosion of UNS 1008 carbon steel and hybrid nano-structured coatings
Bằng: Diaz De Rienzo, Mayri Alejandra
Được phát hành: (2018)

Effect of the sintering technique on the ferroelectric and d33 piezoelectric coefficients of Bi0.5(Na0.84K0.16)0.5TiO3 ceramic
Bằng: Hernández Cuevas, Gamaliel
Được phát hành: (2019)

Structural transformation of vanadate nanotubes into vanadate oxides nanostructures during the dry reforming of methane
Bằng: Oton, Lais F.
Được phát hành: (2019)

Influence of microbial adherence on corrosion of UNS 1008 carbon steel and hybrid nano-structured coatings
Bằng: Diaz De Rienzo, Mayri Alejandra
Được phát hành: (2018)

Influence of Rare Earths Additions on the Microstructure and Hardness of Heat-treated Nanostructured Superalloy Inconel 718
Được phát hành: (2022)

A new method for assessing the utility of powder bed fusion (PBF) feedstock
Được phát hành: (2020)

EIS Evaluation of corrosion resistance of AISI 304 stainless steel exposed to Pseudomonas Stutzeri,
Bằng: Galicia, Monica
Được phát hành: (2021)

Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718
Bằng: Castro Carmona, Javier Servando
Được phát hành: (2024)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Được phát hành: (2021)

Determination of the Chemical Composition of Lithium Niobate Powders
Bằng: Sanchez Dena, Oswaldo
Được phát hành: (2019)

Frequency-Time Domain Analysis of Electrochemical Noise of Passivated AM350 Stainless Steel for Aeronautical Applications
Được phát hành: (2022)

Improvements in the thermomechanical and electrical behavior of hybrid carbon-epoxy nanocomposites
Được phát hành: (2021)

Influence of Mischmetal Rare Earth Elements Additions on the Microstructural Properties of HIP and Conventional Sintering Heat Treated Inconel 718
Được phát hành: (2024)

A Steepest Ascent Analysis Based on an Experimental Approach for the Hardening Process of a Steel Alloy
Bằng: Rodriguez Picon, Luis Alberto
Được phát hành: (2024)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
Bằng: Garay Reyes, Carlos Gamaliel
Được phát hành: (2019)

Phase composition and its effect on the mechanical performance of an AlCoCrFeNiTi high-entropy alloy
Bằng: Rodriguez Gonzalez, Claudia
Được phát hành: (2022)

Improving piezoelectric properties in BNKT-ST through uniaxial viscosity monitoring: 6CP23-1
Bằng: Antonino Vega Siverio, et al.
Được phát hành: (2023)

Is Chickpea a Potential Substitute for Soybean? Phenolic Bioactives and Potential Health Benefits
Bằng: de Camargo, Adriano Costa
Được phát hành: (2019)

Theoretical–Cheminformatic Study of Four Indolylphytoquinones, Prospective Anticancer Candidates
Bằng: Martinez, Carlos Alberto
Được phát hành: (2024)

Enhancing the Cytocompatibility of Cobalt-Iron Ferrite Nanoparticles Through Chemical Substitution and Surface Modification
Bằng: Chapa, Christian
Được phát hành: (2023)

The selection of candidates for federal deputies: The case of Tlaxcala during the 2015 electoral process
Bằng: María Magdalena Sam Bautista, et al.
Được phát hành: (2022)

Voter´´´'s dilemma between honest and competent candidates in the 2018 elections in Mexico and Brazil
Bằng: José Daniel Sousa Oliva
Được phát hành: (2023)

Multipass Scratch Behavior of Borided and Nitrided H13 Steel
Bằng: Vega-Moron, Roberto Carlos
Được phát hành: (2018)

Effect of Zn Nanoparticles Doping on Oxytetracycline Removal by Natural Aluminosilicate and Carbon Nanotubes
Được phát hành: (2022)

Corrosion Behavior of Titanium and Titanium Alloys in Ringer ́sSolution
Được phát hành: (2022)

Influence of microbial adherence on corrosion of UNS 1008 carbon steel and hybrid nano-structured coatings
Bằng: Galicia, Monica
Được phát hành: (2018)

Reducción de Cr+6 por bacterias aisladas de suelos agrícolas en San Víctor, Corozal, Belice
Được phát hành: (2021)

Effect on Microstructure and Nanoindentation of a AlCoFeMoNi High Entropy Alloy
Bằng: Baldenebro-Lopez, Francisco
Được phát hành: (2018)

Comparison of the corrosion performance of alloys HP40 and T22 exposed to molten salts at high temperature
Được phát hành: (2021)

Microstructural defects in AISI 4000 series steel subjected to a 3% NaCl corrosion process.
Bằng: Ordoñez Casanova, Elsa Gabriela
Được phát hành: (2021)

Effects of annealing on the magnetic properties and magnetocaloric effects of B doped Ni-Mn-In melt-spun ribbons
Bằng: Pandey, Sudip
Được phát hành: (2018)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
Bằng: Castro Carmona, Javier Servando
Được phát hành: (2020)

Evaluation of in vitro bioactivity and in vitro biocompatibility of Polycaprolactone/Hyaluronic acid/Multiwalled Carbon Nanotubes/Extract from Mimosa Tenuiflora composites
Bằng: Martel-Estrada, Santos-Adriana
Được phát hành: (2018)

Evaluation of in vitro bioactivity and in vitro biocompatibility of Polycaprolactone/Hyaluronic acid/Multiwalled Carbon Nanotubes/Extract from Mimosa Tenuiflora composites
Bằng: Martel-Estrada, Santos-Adriana
Được phát hành: (2018)

Evaluation of in vitro bioactivity and in vitro biocompatibility of Polycaprolactone/Hyaluronic Acid/Multiwalled Carbon Nanotubes/Extract from Mimosa tenuilfora composites
Bằng: Limón-Martínez, Rocío Janeth
Được phát hành: (2019)

Formation of Escherichia coli biofilms on the titanium alloy Ti6Al4V: analysis of the interface and assessment of corrosion
Bằng: Galicia, Monica
Được phát hành: (2021)

Comportamiento magnético a bajas temperaturas de nanofibras de MnFe2O4 sintetizado por electrohilado
Bằng: Diana María Carrillo Flores, et al.
Được phát hành: (2016)