Effect on Microstructure and Nanoindentation of a AlCoFeMoNi High Entropy Alloy
In this work, elemental powders supplied by Alfa Aesar with purity higher than 99.5% in weight Al, Co, Fe, Mo and Ni were initially weighed and mixed. The MA was performed in a high-energy ball mill (SPEX-8000M) for 10 h periods, under an argon atmosphere. Methanol was used as a process control agen...
Zapisane w:
1. autor: | Baldenebro-Lopez, Francisco |
---|---|
Kolejni autorzy: | Gómez Esparza, Cynthia Deisy, Martínez-Sánchez, Roberto, Camacho-Montes, Hector |
Format: | Artículo |
Język: | en_US |
Wydane: |
2018
|
Hasła przedmiotowe: | |
Dostęp online: | https://doi.org/10.1017/S1431927618006049 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/effect-on-microstructure-and-nanoindentation-of-a-alcofemoni-high-entropy-alloy/A6E2C252912B7892B984B233B7178565 |
Etykiety: |
Dodaj etykietę
Nie ma etykietki, Dołącz pierwszą etykiete!
|
Podobne zapisy
-
Influence of Sintering Temperature on AlCoCrFeNiMo(Tix, x=0,1) High Entropy Alloys
od: Baldenebro-Lopez, Francisco
Wydane: (2018) -
Phase composition and its effect on the mechanical performance of an AlCoCrFeNiTi high-entropy alloy
od: Rodriguez Gonzalez, Claudia
Wydane: (2022) -
Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
od: Castro Carmona, Javier Servando
Wydane: (2020) -
Comparison of the corrosion performance of alloys HP40 and T22 exposed to molten salts at high temperature
Wydane: (2021) -
Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
od: Garay Reyes, Carlos Gamaliel
Wydane: (2019)