Torsion analysis of the anisotropic behavior of FDM technology

Torsion analysis of the anisotropic behavior of FDM technology

Several reports have studied the mechanical properties of the material extrusion additive manufacturing process, specifically referred to as fusion deposition modeling (FDM) developed by Stratasys. As the applications for 3D printed parts continue to grow in diversity (e.g., gears, propellers, and b...

Saved in:

書目詳細資料
主要作者:	Balderrama Armendariz, Cesar Omar
其他作者:	Maldonado-Macías, Aide, MacDonald, Eric, Espalin, David, Wicker, Ryan, CORTES, DAVID
格式:	Artículo
語言:	spa
出版:	2018
主題:	Torsion test Additive manufacturing Anisotropy Fused deposition modeling Stress strain
在線閱讀:	https://doi.org/10.1007/s00170-018-1602-0 https://link.springer.com/content/pdf/10.1007/s00170-018-1602-0.pdf
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
由: Rosel-Solis, Manuel-Javier
出版: (2019)

Additive manufacturing: Fused deposition modeling advances
由: Aguilar Duque, Julian Israel
出版: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
由: Balderrama Armendariz, Cesar Omar
出版: (2019)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
由: Arias-Nava, Elias H.
出版: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
由: Arias-Nava, Elias H.
出版: (2018)

On Properties of Torsional Metric Spaces
由: Trejo, Hector
出版: (2018)

LABRADOR HEMBRA CON DISTENSIÓN Y DOLOR ABDOMINAL
由: V. Alonso, et al.
出版: (2018)

Weibull S-N Fatigue Strength Curve Analysis for A572 Gr. 50 Steel, Based on the True Stress—True Strain Approach
由: Piña Monarrez, Manuel Román
出版: (2020)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
出版: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
由: Maximino Matus Ruiz
出版: (2023)

Electrochemical behavior of Zn‐REP nanohybrid coatings during marine Shewanella sp. biofilm formation
由: Galicia, Monica
出版: (2021)

Weibull analysis for normal/accelerated and fatigue random vibration test
由: Piña Monarrez, Manuel Román
出版: (2019)

The effectiveness of published continuum constitutive laws to predict stress-assisted densification of powder compacts
由: Camacho Montes, Hector
出版: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
由: Garza-Hernández, R.
出版: (2019)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
由: Castro Carmona, Javier Servando
出版: (2020)

Probabilistic Linear Time-Dependent Stress Beam Analysis and Its Stress-Strength Reliability
由: Piña Monarrez, Manuel Román
出版: (2021)

Impact of job strain and being overweight on middle and senior managers from the manufacturing sector in the Mexican industry
出版: (2021)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
由: Becerril-Silva, M.
出版: (2018)

Weibull Analysis for Constant and Variant Stress Behavior Using the Alt Method for Single Stress and the Taguchi Method for Several Stress Variables
由: Piña Monarrez, Manuel Román
出版: (2018)

Effects of Job Content and Physical Activity on Body Mass Index among Obese Managers of the Mexican Manufacturing Industry
出版: (2020)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
出版: (2021)

The squirrel-cage induction motor model and its parameter identification via steady and dynamic tests
由: Morfín, Onofre
出版: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
出版: (2020)

Water conservation potential of modified turf grass irrigation in urban parks of Phoenix, Arizona
出版: (2022)

A comparison between the Functional Analysis and the Causal-Loop Diagram to model inventive problems
由: Delgado Maciel, Jesus
出版: (2018)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
出版: (2021)

Lean-Sigma for product improvement using the VoC for enhancing the product competitiveness
由: Alba-Baena, Noé
出版: (2019)

Reliability analysis for DC motors under voltage step-stress scenario
由: Mendez Gonzalez, Luis Carlos
出版: (2020)

Development of a descriptive study of work stress, physical activity, eating habits and obesity in the maquiladora industry using software applications
出版: (2020)

Application of the COHRV Conceptual Framework to Enhance Sustainable Manufacturing
由: Riosvelasco, Georgina Elizabeth
出版: (2022)

Stress-strength Weibull analysis with different shape parameter B and probabilistic safety factor
由: Piña Monarrez, Manuel Román
出版: (2020)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
出版: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
出版: (2020)

Acute Exercise Effect on Glomerular Filtration in the Elderly
由: Ramos Jimenez, Arnulfo
出版: (2020)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
由: Mota, Maria de la Luz
出版: (2021)

Estimation of the lifespan distribution of gold nanoparticles stabilized with lipoic acid by accelerated degradation tests and wiener process
由: Cornejo Monroy, Delfino
出版: (2022)

Lean Manufacturing Critical Success Factors for the Transportation Equipment Manufacturing Industry in Mexico
出版: (2020)

Psychological distress and lack of PINK1 promote bioenergetics alterations in peripheral blood mononuclear cells
由: Martinez-Martinez, Alejandro
出版: (2020)

PILOT TEST OF AN INSTRUMENT FOR THE ASSESSMENT OF MOBBING, BURNOUT, JOB PERFORMANCE AND OCCUPATIONAL PERFORMANCE IN ADMINISTRATIVE PERSONNEL OF THE MAQUILADORA INDUSTRY
出版: (2022)

Mental health effects on workers returning to work during the Covid-19 pandemic. An analysis of the maquiladora industry in northern Mexico
由: Máynez Guaderrama, Aurora
出版: (2022)