Torsion analysis of the anisotropic behavior of FDM technology

Torsion analysis of the anisotropic behavior of FDM technology

Several reports have studied the mechanical properties of the material extrusion additive manufacturing process, specifically referred to as fusion deposition modeling (FDM) developed by Stratasys. As the applications for 3D printed parts continue to grow in diversity (e.g., gears, propellers, and b...

Mô tả đầy đủ

Đã lưu trong:

Chi tiết về thư mục
Tác giả chính:	Balderrama Armendariz, Cesar Omar
Tác giả khác:	Maldonado-Macías, Aide, MacDonald, Eric, Espalin, David, Wicker, Ryan, CORTES, DAVID
Định dạng:	Artículo
Ngôn ngữ:	spa
Được phát hành:	2018
Những chủ đề:	Torsion test Additive manufacturing Anisotropy Fused deposition modeling Stress strain
Truy cập trực tuyến:	https://doi.org/10.1007/s00170-018-1602-0 https://link.springer.com/content/pdf/10.1007/s00170-018-1602-0.pdf
Các nhãn:	Thêm thẻ Không có thẻ, Là người đầu tiên thẻ bản ghi này!

Những quyển sách tương tự

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
Bằng: Rosel-Solis, Manuel-Javier
Được phát hành: (2019)

Additive manufacturing: Fused deposition modeling advances
Bằng: Aguilar Duque, Julian Israel
Được phát hành: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
Bằng: Balderrama Armendariz, Cesar Omar
Được phát hành: (2019)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Bằng: Arias-Nava, Elias H.
Được phát hành: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Bằng: Arias-Nava, Elias H.
Được phát hành: (2018)

On Properties of Torsional Metric Spaces
Bằng: Trejo, Hector
Được phát hành: (2018)

LABRADOR HEMBRA CON DISTENSIÓN Y DOLOR ABDOMINAL
Bằng: V. Alonso, et al.
Được phát hành: (2018)

Weibull S-N Fatigue Strength Curve Analysis for A572 Gr. 50 Steel, Based on the True Stress—True Strain Approach
Bằng: Piña Monarrez, Manuel Román
Được phát hành: (2020)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Được phát hành: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
Bằng: Maximino Matus Ruiz
Được phát hành: (2023)

Electrochemical behavior of Zn‐REP nanohybrid coatings during marine Shewanella sp. biofilm formation
Bằng: Galicia, Monica
Được phát hành: (2021)

Weibull analysis for normal/accelerated and fatigue random vibration test
Bằng: Piña Monarrez, Manuel Román
Được phát hành: (2019)

The effectiveness of published continuum constitutive laws to predict stress-assisted densification of powder compacts
Bằng: Camacho Montes, Hector
Được phát hành: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
Bằng: Garza-Hernández, R.
Được phát hành: (2019)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
Bằng: Castro Carmona, Javier Servando
Được phát hành: (2020)

Probabilistic Linear Time-Dependent Stress Beam Analysis and Its Stress-Strength Reliability
Bằng: Piña Monarrez, Manuel Román
Được phát hành: (2021)

Impact of job strain and being overweight on middle and senior managers from the manufacturing sector in the Mexican industry
Được phát hành: (2021)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
Bằng: Becerril-Silva, M.
Được phát hành: (2018)

Weibull Analysis for Constant and Variant Stress Behavior Using the Alt Method for Single Stress and the Taguchi Method for Several Stress Variables
Bằng: Piña Monarrez, Manuel Román
Được phát hành: (2018)

Effects of Job Content and Physical Activity on Body Mass Index among Obese Managers of the Mexican Manufacturing Industry
Được phát hành: (2020)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Được phát hành: (2021)

The squirrel-cage induction motor model and its parameter identification via steady and dynamic tests
Bằng: Morfín, Onofre
Được phát hành: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Được phát hành: (2020)

Water conservation potential of modified turf grass irrigation in urban parks of Phoenix, Arizona
Được phát hành: (2022)

A comparison between the Functional Analysis and the Causal-Loop Diagram to model inventive problems
Bằng: Delgado Maciel, Jesus
Được phát hành: (2018)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Được phát hành: (2021)

Lean-Sigma for product improvement using the VoC for enhancing the product competitiveness
Bằng: Alba-Baena, Noé
Được phát hành: (2019)

Reliability analysis for DC motors under voltage step-stress scenario
Bằng: Mendez Gonzalez, Luis Carlos
Được phát hành: (2020)

Development of a descriptive study of work stress, physical activity, eating habits and obesity in the maquiladora industry using software applications
Được phát hành: (2020)

Application of the COHRV Conceptual Framework to Enhance Sustainable Manufacturing
Bằng: Riosvelasco, Georgina Elizabeth
Được phát hành: (2022)

Stress-strength Weibull analysis with different shape parameter B and probabilistic safety factor
Bằng: Piña Monarrez, Manuel Román
Được phát hành: (2020)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Được phát hành: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Được phát hành: (2020)

Acute Exercise Effect on Glomerular Filtration in the Elderly
Bằng: Ramos Jimenez, Arnulfo
Được phát hành: (2020)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
Bằng: Mota, Maria de la Luz
Được phát hành: (2021)

Estimation of the lifespan distribution of gold nanoparticles stabilized with lipoic acid by accelerated degradation tests and wiener process
Bằng: Cornejo Monroy, Delfino
Được phát hành: (2022)

Lean Manufacturing Critical Success Factors for the Transportation Equipment Manufacturing Industry in Mexico
Được phát hành: (2020)

Mental health effects on workers returning to work during the Covid-19 pandemic. An analysis of the maquiladora industry in northern Mexico
Bằng: Máynez Guaderrama, Aurora
Được phát hành: (2022)

Psychological distress and lack of PINK1 promote bioenergetics alterations in peripheral blood mononuclear cells
Bằng: Martinez-Martinez, Alejandro
Được phát hành: (2020)

PILOT TEST OF AN INSTRUMENT FOR THE ASSESSMENT OF MOBBING, BURNOUT, JOB PERFORMANCE AND OCCUPATIONAL PERFORMANCE IN ADMINISTRATIVE PERSONNEL OF THE MAQUILADORA INDUSTRY
Được phát hành: (2022)