Torsion analysis of the anisotropic behavior of FDM technology

Torsion analysis of the anisotropic behavior of FDM technology

Several reports have studied the mechanical properties of the material extrusion additive manufacturing process, specifically referred to as fusion deposition modeling (FDM) developed by Stratasys. As the applications for 3D printed parts continue to grow in diversity (e.g., gears, propellers, and b...

Kaydedildi:

Detaylı Bibliyografya
Yazar:	Balderrama Armendariz, Cesar Omar
Diğer Yazarlar:	Maldonado-Macías, Aide, MacDonald, Eric, Espalin, David, Wicker, Ryan, CORTES, DAVID
Materyal Türü:	Artículo
Dil:	spa
Baskı/Yayın Bilgisi:	2018
Konular:	Torsion test Additive manufacturing Anisotropy Fused deposition modeling Stress strain
Online Erişim:	https://doi.org/10.1007/s00170-018-1602-0 https://link.springer.com/content/pdf/10.1007/s00170-018-1602-0.pdf
Etiketler:	Etiketle Etiket eklenmemiş, İlk siz ekleyin!

Benzer Materyaller

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
Yazar:: Rosel-Solis, Manuel-Javier
Baskı/Yayın Bilgisi: (2019)

Additive manufacturing: Fused deposition modeling advances
Yazar:: Aguilar Duque, Julian Israel
Baskı/Yayın Bilgisi: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
Yazar:: Balderrama Armendariz, Cesar Omar
Baskı/Yayın Bilgisi: (2019)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Yazar:: Arias-Nava, Elias H.
Baskı/Yayın Bilgisi: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Yazar:: Arias-Nava, Elias H.
Baskı/Yayın Bilgisi: (2018)

On Properties of Torsional Metric Spaces
Yazar:: Trejo, Hector
Baskı/Yayın Bilgisi: (2018)

LABRADOR HEMBRA CON DISTENSIÓN Y DOLOR ABDOMINAL
Yazar:: V. Alonso, ve diğerleri
Baskı/Yayın Bilgisi: (2018)

Weibull S-N Fatigue Strength Curve Analysis for A572 Gr. 50 Steel, Based on the True Stress—True Strain Approach
Yazar:: Piña Monarrez, Manuel Román
Baskı/Yayın Bilgisi: (2020)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Baskı/Yayın Bilgisi: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
Yazar:: Maximino Matus Ruiz
Baskı/Yayın Bilgisi: (2023)

Electrochemical behavior of Zn‐REP nanohybrid coatings during marine Shewanella sp. biofilm formation
Yazar:: Galicia, Monica
Baskı/Yayın Bilgisi: (2021)

The effectiveness of published continuum constitutive laws to predict stress-assisted densification of powder compacts
Yazar:: Camacho Montes, Hector
Baskı/Yayın Bilgisi: (2022)

Weibull analysis for normal/accelerated and fatigue random vibration test
Yazar:: Piña Monarrez, Manuel Román
Baskı/Yayın Bilgisi: (2019)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
Yazar:: Garza-Hernández, R.
Baskı/Yayın Bilgisi: (2019)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
Yazar:: Castro Carmona, Javier Servando
Baskı/Yayın Bilgisi: (2020)

Probabilistic Linear Time-Dependent Stress Beam Analysis and Its Stress-Strength Reliability
Yazar:: Piña Monarrez, Manuel Román
Baskı/Yayın Bilgisi: (2021)

Impact of job strain and being overweight on middle and senior managers from the manufacturing sector in the Mexican industry
Baskı/Yayın Bilgisi: (2021)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
Yazar:: Becerril-Silva, M.
Baskı/Yayın Bilgisi: (2018)

Weibull Analysis for Constant and Variant Stress Behavior Using the Alt Method for Single Stress and the Taguchi Method for Several Stress Variables
Yazar:: Piña Monarrez, Manuel Román
Baskı/Yayın Bilgisi: (2018)

Effects of Job Content and Physical Activity on Body Mass Index among Obese Managers of the Mexican Manufacturing Industry
Baskı/Yayın Bilgisi: (2020)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Baskı/Yayın Bilgisi: (2021)

The squirrel-cage induction motor model and its parameter identification via steady and dynamic tests
Yazar:: Morfín, Onofre
Baskı/Yayın Bilgisi: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Baskı/Yayın Bilgisi: (2020)

Water conservation potential of modified turf grass irrigation in urban parks of Phoenix, Arizona
Baskı/Yayın Bilgisi: (2022)

A comparison between the Functional Analysis and the Causal-Loop Diagram to model inventive problems
Yazar:: Delgado Maciel, Jesus
Baskı/Yayın Bilgisi: (2018)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Baskı/Yayın Bilgisi: (2021)

Lean-Sigma for product improvement using the VoC for enhancing the product competitiveness
Yazar:: Alba-Baena, Noé
Baskı/Yayın Bilgisi: (2019)

Reliability analysis for DC motors under voltage step-stress scenario
Yazar:: Mendez Gonzalez, Luis Carlos
Baskı/Yayın Bilgisi: (2020)

Development of a descriptive study of work stress, physical activity, eating habits and obesity in the maquiladora industry using software applications
Baskı/Yayın Bilgisi: (2020)

Application of the COHRV Conceptual Framework to Enhance Sustainable Manufacturing
Yazar:: Riosvelasco, Georgina Elizabeth
Baskı/Yayın Bilgisi: (2022)

Stress-strength Weibull analysis with different shape parameter B and probabilistic safety factor
Yazar:: Piña Monarrez, Manuel Román
Baskı/Yayın Bilgisi: (2020)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Baskı/Yayın Bilgisi: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Baskı/Yayın Bilgisi: (2020)

Acute Exercise Effect on Glomerular Filtration in the Elderly
Yazar:: Ramos Jimenez, Arnulfo
Baskı/Yayın Bilgisi: (2020)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
Yazar:: Mota, Maria de la Luz
Baskı/Yayın Bilgisi: (2021)

Estimation of the lifespan distribution of gold nanoparticles stabilized with lipoic acid by accelerated degradation tests and wiener process
Yazar:: Cornejo Monroy, Delfino
Baskı/Yayın Bilgisi: (2022)

Lean Manufacturing Critical Success Factors for the Transportation Equipment Manufacturing Industry in Mexico
Baskı/Yayın Bilgisi: (2020)

Mental health effects on workers returning to work during the Covid-19 pandemic. An analysis of the maquiladora industry in northern Mexico
Yazar:: Máynez Guaderrama, Aurora
Baskı/Yayın Bilgisi: (2022)

Psychological distress and lack of PINK1 promote bioenergetics alterations in peripheral blood mononuclear cells
Yazar:: Martinez-Martinez, Alejandro
Baskı/Yayın Bilgisi: (2020)

PILOT TEST OF AN INSTRUMENT FOR THE ASSESSMENT OF MOBBING, BURNOUT, JOB PERFORMANCE AND OCCUPATIONAL PERFORMANCE IN ADMINISTRATIVE PERSONNEL OF THE MAQUILADORA INDUSTRY
Baskı/Yayın Bilgisi: (2022)