Torsion analysis of the anisotropic behavior of FDM technology

Torsion analysis of the anisotropic behavior of FDM technology

Several reports have studied the mechanical properties of the material extrusion additive manufacturing process, specifically referred to as fusion deposition modeling (FDM) developed by Stratasys. As the applications for 3D printed parts continue to grow in diversity (e.g., gears, propellers, and b...

Szczegółowa specyfikacja

Zapisane w:

Opis bibliograficzny
1. autor:	Balderrama Armendariz, Cesar Omar
Kolejni autorzy:	Maldonado-Macías, Aide, MacDonald, Eric, Espalin, David, Wicker, Ryan, CORTES, DAVID
Format:	Artículo
Język:	spa
Wydane:	2018
Hasła przedmiotowe:	Torsion test Additive manufacturing Anisotropy Fused deposition modeling Stress strain
Dostęp online:	https://doi.org/10.1007/s00170-018-1602-0 https://link.springer.com/content/pdf/10.1007/s00170-018-1602-0.pdf
Etykiety:	Dodaj etykietę Nie ma etykietki, Dołącz pierwszą etykiete!

Podobne zapisy

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
od: Rosel-Solis, Manuel-Javier
Wydane: (2019)

Additive manufacturing: Fused deposition modeling advances
od: Aguilar Duque, Julian Israel
Wydane: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
od: Balderrama Armendariz, Cesar Omar
Wydane: (2019)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Wydane: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Wydane: (2018)

On Properties of Torsional Metric Spaces
od: Trejo, Hector
Wydane: (2018)

LABRADOR HEMBRA CON DISTENSIÓN Y DOLOR ABDOMINAL
od: V. Alonso, i wsp.
Wydane: (2018)

Weibull S-N Fatigue Strength Curve Analysis for A572 Gr. 50 Steel, Based on the True Stress—True Strain Approach
od: Piña Monarrez, Manuel Román
Wydane: (2020)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Wydane: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
od: Maximino Matus Ruiz
Wydane: (2023)

Electrochemical behavior of Zn‐REP nanohybrid coatings during marine Shewanella sp. biofilm formation
od: Galicia, Monica
Wydane: (2021)

Weibull analysis for normal/accelerated and fatigue random vibration test
od: Piña Monarrez, Manuel Román
Wydane: (2019)

The effectiveness of published continuum constitutive laws to predict stress-assisted densification of powder compacts
od: Camacho Montes, Hector
Wydane: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
od: Garza-Hernández, R.
Wydane: (2019)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
od: Castro Carmona, Javier Servando
Wydane: (2020)

Probabilistic Linear Time-Dependent Stress Beam Analysis and Its Stress-Strength Reliability
od: Piña Monarrez, Manuel Román
Wydane: (2021)

Impact of job strain and being overweight on middle and senior managers from the manufacturing sector in the Mexican industry
Wydane: (2021)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
od: Becerril-Silva, M.
Wydane: (2018)

Weibull Analysis for Constant and Variant Stress Behavior Using the Alt Method for Single Stress and the Taguchi Method for Several Stress Variables
od: Piña Monarrez, Manuel Román
Wydane: (2018)

Effects of Job Content and Physical Activity on Body Mass Index among Obese Managers of the Mexican Manufacturing Industry
Wydane: (2020)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Wydane: (2021)

The squirrel-cage induction motor model and its parameter identification via steady and dynamic tests
od: Morfín, Onofre
Wydane: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Wydane: (2020)

Water conservation potential of modified turf grass irrigation in urban parks of Phoenix, Arizona
Wydane: (2022)

A comparison between the Functional Analysis and the Causal-Loop Diagram to model inventive problems
od: Delgado Maciel, Jesus
Wydane: (2018)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Wydane: (2021)

Lean-Sigma for product improvement using the VoC for enhancing the product competitiveness
od: Alba-Baena, Noé
Wydane: (2019)

Reliability analysis for DC motors under voltage step-stress scenario
od: Mendez Gonzalez, Luis Carlos
Wydane: (2020)

Development of a descriptive study of work stress, physical activity, eating habits and obesity in the maquiladora industry using software applications
Wydane: (2020)

Application of the COHRV Conceptual Framework to Enhance Sustainable Manufacturing
od: Riosvelasco, Georgina Elizabeth
Wydane: (2022)

Stress-strength Weibull analysis with different shape parameter B and probabilistic safety factor
od: Piña Monarrez, Manuel Román
Wydane: (2020)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Wydane: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Wydane: (2020)

Acute Exercise Effect on Glomerular Filtration in the Elderly
od: Ramos Jimenez, Arnulfo
Wydane: (2020)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
od: Mota, Maria de la Luz
Wydane: (2021)

Estimation of the lifespan distribution of gold nanoparticles stabilized with lipoic acid by accelerated degradation tests and wiener process
od: Cornejo Monroy, Delfino
Wydane: (2022)

Lean Manufacturing Critical Success Factors for the Transportation Equipment Manufacturing Industry in Mexico
Wydane: (2020)

Mental health effects on workers returning to work during the Covid-19 pandemic. An analysis of the maquiladora industry in northern Mexico
od: Máynez Guaderrama, Aurora
Wydane: (2022)

Psychological distress and lack of PINK1 promote bioenergetics alterations in peripheral blood mononuclear cells
od: Martinez-Martinez, Alejandro
Wydane: (2020)

PILOT TEST OF AN INSTRUMENT FOR THE ASSESSMENT OF MOBBING, BURNOUT, JOB PERFORMANCE AND OCCUPATIONAL PERFORMANCE IN ADMINISTRATIVE PERSONNEL OF THE MAQUILADORA INDUSTRY
Wydane: (2022)