Torsion analysis of the anisotropic behavior of FDM technology

Torsion analysis of the anisotropic behavior of FDM technology

Several reports have studied the mechanical properties of the material extrusion additive manufacturing process, specifically referred to as fusion deposition modeling (FDM) developed by Stratasys. As the applications for 3D printed parts continue to grow in diversity (e.g., gears, propellers, and b...

Volledige beschrijving

Bewaard in:

Bibliografische gegevens
Hoofdauteur:	Balderrama Armendariz, Cesar Omar
Andere auteurs:	Maldonado-Macías, Aide, MacDonald, Eric, Espalin, David, Wicker, Ryan, CORTES, DAVID
Formaat:	Artículo
Taal:	spa
Gepubliceerd in:	2018
Onderwerpen:	Torsion test Additive manufacturing Anisotropy Fused deposition modeling Stress strain
Online toegang:	https://doi.org/10.1007/s00170-018-1602-0 https://link.springer.com/content/pdf/10.1007/s00170-018-1602-0.pdf
Tags:	Voeg label toe Geen labels, Wees de eerste die dit record labelt!

Gelijkaardige items

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
door: Rosel-Solis, Manuel-Javier
Gepubliceerd in: (2019)

Additive manufacturing: Fused deposition modeling advances
door: Aguilar Duque, Julian Israel
Gepubliceerd in: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
door: Balderrama Armendariz, Cesar Omar
Gepubliceerd in: (2019)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
door: Arias-Nava, Elias H.
Gepubliceerd in: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
door: Arias-Nava, Elias H.
Gepubliceerd in: (2018)

On Properties of Torsional Metric Spaces
door: Trejo, Hector
Gepubliceerd in: (2018)

LABRADOR HEMBRA CON DISTENSIÓN Y DOLOR ABDOMINAL
door: V. Alonso, et al.
Gepubliceerd in: (2018)

Weibull S-N Fatigue Strength Curve Analysis for A572 Gr. 50 Steel, Based on the True Stress—True Strain Approach
door: Piña Monarrez, Manuel Román
Gepubliceerd in: (2020)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Gepubliceerd in: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
door: Maximino Matus Ruiz
Gepubliceerd in: (2023)

Electrochemical behavior of Zn‐REP nanohybrid coatings during marine Shewanella sp. biofilm formation
door: Galicia, Monica
Gepubliceerd in: (2021)

Weibull analysis for normal/accelerated and fatigue random vibration test
door: Piña Monarrez, Manuel Román
Gepubliceerd in: (2019)

The effectiveness of published continuum constitutive laws to predict stress-assisted densification of powder compacts
door: Camacho Montes, Hector
Gepubliceerd in: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
door: Garza-Hernández, R.
Gepubliceerd in: (2019)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
door: Castro Carmona, Javier Servando
Gepubliceerd in: (2020)

Probabilistic Linear Time-Dependent Stress Beam Analysis and Its Stress-Strength Reliability
door: Piña Monarrez, Manuel Román
Gepubliceerd in: (2021)

Impact of job strain and being overweight on middle and senior managers from the manufacturing sector in the Mexican industry
Gepubliceerd in: (2021)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
door: Becerril-Silva, M.
Gepubliceerd in: (2018)

Weibull Analysis for Constant and Variant Stress Behavior Using the Alt Method for Single Stress and the Taguchi Method for Several Stress Variables
door: Piña Monarrez, Manuel Román
Gepubliceerd in: (2018)

Effects of Job Content and Physical Activity on Body Mass Index among Obese Managers of the Mexican Manufacturing Industry
Gepubliceerd in: (2020)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Gepubliceerd in: (2021)

The squirrel-cage induction motor model and its parameter identification via steady and dynamic tests
door: Morfín, Onofre
Gepubliceerd in: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Gepubliceerd in: (2020)

Water conservation potential of modified turf grass irrigation in urban parks of Phoenix, Arizona
Gepubliceerd in: (2022)

A comparison between the Functional Analysis and the Causal-Loop Diagram to model inventive problems
door: Delgado Maciel, Jesus
Gepubliceerd in: (2018)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Gepubliceerd in: (2021)

Lean-Sigma for product improvement using the VoC for enhancing the product competitiveness
door: Alba-Baena, Noé
Gepubliceerd in: (2019)

Reliability analysis for DC motors under voltage step-stress scenario
door: Mendez Gonzalez, Luis Carlos
Gepubliceerd in: (2020)

Development of a descriptive study of work stress, physical activity, eating habits and obesity in the maquiladora industry using software applications
Gepubliceerd in: (2020)

Application of the COHRV Conceptual Framework to Enhance Sustainable Manufacturing
door: Riosvelasco, Georgina Elizabeth
Gepubliceerd in: (2022)

Stress-strength Weibull analysis with different shape parameter B and probabilistic safety factor
door: Piña Monarrez, Manuel Román
Gepubliceerd in: (2020)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Gepubliceerd in: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Gepubliceerd in: (2020)

Acute Exercise Effect on Glomerular Filtration in the Elderly
door: Ramos Jimenez, Arnulfo
Gepubliceerd in: (2020)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
door: Mota, Maria de la Luz
Gepubliceerd in: (2021)

Estimation of the lifespan distribution of gold nanoparticles stabilized with lipoic acid by accelerated degradation tests and wiener process
door: Cornejo Monroy, Delfino
Gepubliceerd in: (2022)

Lean Manufacturing Critical Success Factors for the Transportation Equipment Manufacturing Industry in Mexico
Gepubliceerd in: (2020)

Mental health effects on workers returning to work during the Covid-19 pandemic. An analysis of the maquiladora industry in northern Mexico
door: Máynez Guaderrama, Aurora
Gepubliceerd in: (2022)

Psychological distress and lack of PINK1 promote bioenergetics alterations in peripheral blood mononuclear cells
door: Martinez-Martinez, Alejandro
Gepubliceerd in: (2020)

PILOT TEST OF AN INSTRUMENT FOR THE ASSESSMENT OF MOBBING, BURNOUT, JOB PERFORMANCE AND OCCUPATIONAL PERFORMANCE IN ADMINISTRATIVE PERSONNEL OF THE MAQUILADORA INDUSTRY
Gepubliceerd in: (2022)