Torsion analysis of the anisotropic behavior of FDM technology

Torsion analysis of the anisotropic behavior of FDM technology

Several reports have studied the mechanical properties of the material extrusion additive manufacturing process, specifically referred to as fusion deposition modeling (FDM) developed by Stratasys. As the applications for 3D printed parts continue to grow in diversity (e.g., gears, propellers, and b...

Spremljeno u:

Bibliografski detalji
Glavni autor:	Balderrama Armendariz, Cesar Omar
Daljnji autori:	Maldonado-Macías, Aide, MacDonald, Eric, Espalin, David, Wicker, Ryan, CORTES, DAVID
Format:	Artículo
Jezik:	spa
Izdano:	2018
Teme:	Torsion test Additive manufacturing Anisotropy Fused deposition modeling Stress strain
Online pristup:	https://doi.org/10.1007/s00170-018-1602-0 https://link.springer.com/content/pdf/10.1007/s00170-018-1602-0.pdf
Oznake:	Dodaj oznaku Bez oznaka, Budi prvi tko označuje ovaj zapis!

Similar Items

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
od: Rosel-Solis, Manuel-Javier
Izdano: (2019)

Additive manufacturing: Fused deposition modeling advances
od: Aguilar Duque, Julian Israel
Izdano: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
od: Balderrama Armendariz, Cesar Omar
Izdano: (2019)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Izdano: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
od: Arias-Nava, Elias H.
Izdano: (2018)

On Properties of Torsional Metric Spaces
od: Trejo, Hector
Izdano: (2018)

LABRADOR HEMBRA CON DISTENSIÓN Y DOLOR ABDOMINAL
od: V. Alonso, i dr.
Izdano: (2018)

Weibull S-N Fatigue Strength Curve Analysis for A572 Gr. 50 Steel, Based on the True Stress—True Strain Approach
od: Piña Monarrez, Manuel Román
Izdano: (2020)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Izdano: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
od: Maximino Matus Ruiz
Izdano: (2023)

Electrochemical behavior of Zn‐REP nanohybrid coatings during marine Shewanella sp. biofilm formation
od: Galicia, Monica
Izdano: (2021)

The effectiveness of published continuum constitutive laws to predict stress-assisted densification of powder compacts
od: Camacho Montes, Hector
Izdano: (2022)

Weibull analysis for normal/accelerated and fatigue random vibration test
od: Piña Monarrez, Manuel Román
Izdano: (2019)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
od: Garza-Hernández, R.
Izdano: (2019)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
od: Castro Carmona, Javier Servando
Izdano: (2020)

Probabilistic Linear Time-Dependent Stress Beam Analysis and Its Stress-Strength Reliability
od: Piña Monarrez, Manuel Román
Izdano: (2021)

Impact of job strain and being overweight on middle and senior managers from the manufacturing sector in the Mexican industry
Izdano: (2021)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
od: Becerril-Silva, M.
Izdano: (2018)

Weibull Analysis for Constant and Variant Stress Behavior Using the Alt Method for Single Stress and the Taguchi Method for Several Stress Variables
od: Piña Monarrez, Manuel Román
Izdano: (2018)

Effects of Job Content and Physical Activity on Body Mass Index among Obese Managers of the Mexican Manufacturing Industry
Izdano: (2020)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Izdano: (2021)

The squirrel-cage induction motor model and its parameter identification via steady and dynamic tests
od: Morfín, Onofre
Izdano: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Izdano: (2020)

Water conservation potential of modified turf grass irrigation in urban parks of Phoenix, Arizona
Izdano: (2022)

A comparison between the Functional Analysis and the Causal-Loop Diagram to model inventive problems
od: Delgado Maciel, Jesus
Izdano: (2018)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Izdano: (2021)

Lean-Sigma for product improvement using the VoC for enhancing the product competitiveness
od: Alba-Baena, Noé
Izdano: (2019)

Reliability analysis for DC motors under voltage step-stress scenario
od: Mendez Gonzalez, Luis Carlos
Izdano: (2020)

Development of a descriptive study of work stress, physical activity, eating habits and obesity in the maquiladora industry using software applications
Izdano: (2020)

Application of the COHRV Conceptual Framework to Enhance Sustainable Manufacturing
od: Riosvelasco, Georgina Elizabeth
Izdano: (2022)

Stress-strength Weibull analysis with different shape parameter B and probabilistic safety factor
od: Piña Monarrez, Manuel Román
Izdano: (2020)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Izdano: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Izdano: (2020)

Acute Exercise Effect on Glomerular Filtration in the Elderly
od: Ramos Jimenez, Arnulfo
Izdano: (2020)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
od: Mota, Maria de la Luz
Izdano: (2021)

Estimation of the lifespan distribution of gold nanoparticles stabilized with lipoic acid by accelerated degradation tests and wiener process
od: Cornejo Monroy, Delfino
Izdano: (2022)

Lean Manufacturing Critical Success Factors for the Transportation Equipment Manufacturing Industry in Mexico
Izdano: (2020)

Mental health effects on workers returning to work during the Covid-19 pandemic. An analysis of the maquiladora industry in northern Mexico
od: Máynez Guaderrama, Aurora
Izdano: (2022)

Psychological distress and lack of PINK1 promote bioenergetics alterations in peripheral blood mononuclear cells
od: Martinez-Martinez, Alejandro
Izdano: (2020)

PILOT TEST OF AN INSTRUMENT FOR THE ASSESSMENT OF MOBBING, BURNOUT, JOB PERFORMANCE AND OCCUPATIONAL PERFORMANCE IN ADMINISTRATIVE PERSONNEL OF THE MAQUILADORA INDUSTRY
Izdano: (2022)