Torsion analysis of the anisotropic behavior of FDM technology

Torsion analysis of the anisotropic behavior of FDM technology

Several reports have studied the mechanical properties of the material extrusion additive manufacturing process, specifically referred to as fusion deposition modeling (FDM) developed by Stratasys. As the applications for 3D printed parts continue to grow in diversity (e.g., gears, propellers, and b...

पूर्ण विवरण

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखक:	Balderrama Armendariz, Cesar Omar
अन्य लेखक:	Maldonado-Macías, Aide, MacDonald, Eric, Espalin, David, Wicker, Ryan, CORTES, DAVID
स्वरूप:	Artículo
भाषा:	spa
प्रकाशित:	2018
विषय:	Torsion test Additive manufacturing Anisotropy Fused deposition modeling Stress strain
ऑनलाइन पहुंच:	https://doi.org/10.1007/s00170-018-1602-0 https://link.springer.com/content/pdf/10.1007/s00170-018-1602-0.pdf
टैग :	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
द्वारा: Rosel-Solis, Manuel-Javier
प्रकाशित: (2019)

Additive manufacturing: Fused deposition modeling advances
द्वारा: Aguilar Duque, Julian Israel
प्रकाशित: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
द्वारा: Balderrama Armendariz, Cesar Omar
प्रकाशित: (2019)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
द्वारा: Arias-Nava, Elias H.
प्रकाशित: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
द्वारा: Arias-Nava, Elias H.
प्रकाशित: (2018)

On Properties of Torsional Metric Spaces
द्वारा: Trejo, Hector
प्रकाशित: (2018)

LABRADOR HEMBRA CON DISTENSIÓN Y DOLOR ABDOMINAL
द्वारा: V. Alonso, और अन्य
प्रकाशित: (2018)

Weibull S-N Fatigue Strength Curve Analysis for A572 Gr. 50 Steel, Based on the True Stress—True Strain Approach
द्वारा: Piña Monarrez, Manuel Román
प्रकाशित: (2020)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
प्रकाशित: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
द्वारा: Maximino Matus Ruiz
प्रकाशित: (2023)

Electrochemical behavior of Zn‐REP nanohybrid coatings during marine Shewanella sp. biofilm formation
द्वारा: Galicia, Monica
प्रकाशित: (2021)

The effectiveness of published continuum constitutive laws to predict stress-assisted densification of powder compacts
द्वारा: Camacho Montes, Hector
प्रकाशित: (2022)

Weibull analysis for normal/accelerated and fatigue random vibration test
द्वारा: Piña Monarrez, Manuel Román
प्रकाशित: (2019)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
द्वारा: Garza-Hernández, R.
प्रकाशित: (2019)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
द्वारा: Castro Carmona, Javier Servando
प्रकाशित: (2020)

Probabilistic Linear Time-Dependent Stress Beam Analysis and Its Stress-Strength Reliability
द्वारा: Piña Monarrez, Manuel Román
प्रकाशित: (2021)

Impact of job strain and being overweight on middle and senior managers from the manufacturing sector in the Mexican industry
प्रकाशित: (2021)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
द्वारा: Becerril-Silva, M.
प्रकाशित: (2018)

Weibull Analysis for Constant and Variant Stress Behavior Using the Alt Method for Single Stress and the Taguchi Method for Several Stress Variables
द्वारा: Piña Monarrez, Manuel Román
प्रकाशित: (2018)

Effects of Job Content and Physical Activity on Body Mass Index among Obese Managers of the Mexican Manufacturing Industry
प्रकाशित: (2020)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
प्रकाशित: (2021)

The squirrel-cage induction motor model and its parameter identification via steady and dynamic tests
द्वारा: Morfín, Onofre
प्रकाशित: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
प्रकाशित: (2020)

Water conservation potential of modified turf grass irrigation in urban parks of Phoenix, Arizona
प्रकाशित: (2022)

A comparison between the Functional Analysis and the Causal-Loop Diagram to model inventive problems
द्वारा: Delgado Maciel, Jesus
प्रकाशित: (2018)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
प्रकाशित: (2021)

Lean-Sigma for product improvement using the VoC for enhancing the product competitiveness
द्वारा: Alba-Baena, Noé
प्रकाशित: (2019)

Reliability analysis for DC motors under voltage step-stress scenario
द्वारा: Mendez Gonzalez, Luis Carlos
प्रकाशित: (2020)

Development of a descriptive study of work stress, physical activity, eating habits and obesity in the maquiladora industry using software applications
प्रकाशित: (2020)

Application of the COHRV Conceptual Framework to Enhance Sustainable Manufacturing
द्वारा: Riosvelasco, Georgina Elizabeth
प्रकाशित: (2022)

Stress-strength Weibull analysis with different shape parameter B and probabilistic safety factor
द्वारा: Piña Monarrez, Manuel Román
प्रकाशित: (2020)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
प्रकाशित: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
प्रकाशित: (2020)

Acute Exercise Effect on Glomerular Filtration in the Elderly
द्वारा: Ramos Jimenez, Arnulfo
प्रकाशित: (2020)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
द्वारा: Mota, Maria de la Luz
प्रकाशित: (2021)

Estimation of the lifespan distribution of gold nanoparticles stabilized with lipoic acid by accelerated degradation tests and wiener process
द्वारा: Cornejo Monroy, Delfino
प्रकाशित: (2022)

Lean Manufacturing Critical Success Factors for the Transportation Equipment Manufacturing Industry in Mexico
प्रकाशित: (2020)

Mental health effects on workers returning to work during the Covid-19 pandemic. An analysis of the maquiladora industry in northern Mexico
द्वारा: Máynez Guaderrama, Aurora
प्रकाशित: (2022)

Psychological distress and lack of PINK1 promote bioenergetics alterations in peripheral blood mononuclear cells
द्वारा: Martinez-Martinez, Alejandro
प्रकाशित: (2020)

PILOT TEST OF AN INSTRUMENT FOR THE ASSESSMENT OF MOBBING, BURNOUT, JOB PERFORMANCE AND OCCUPATIONAL PERFORMANCE IN ADMINISTRATIVE PERSONNEL OF THE MAQUILADORA INDUSTRY
प्रकाशित: (2022)