Torsion analysis of the anisotropic behavior of FDM technology

Torsion analysis of the anisotropic behavior of FDM technology

Several reports have studied the mechanical properties of the material extrusion additive manufacturing process, specifically referred to as fusion deposition modeling (FDM) developed by Stratasys. As the applications for 3D printed parts continue to grow in diversity (e.g., gears, propellers, and b...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Hovedforfatter:	Balderrama Armendariz, Cesar Omar
Andre forfattere:	Maldonado-Macías, Aide, MacDonald, Eric, Espalin, David, Wicker, Ryan, CORTES, DAVID
Format:	Artículo
Sprog:	spa
Udgivet:	2018
Fag:	Torsion test Additive manufacturing Anisotropy Fused deposition modeling Stress strain
Online adgang:	https://doi.org/10.1007/s00170-018-1602-0 https://link.springer.com/content/pdf/10.1007/s00170-018-1602-0.pdf
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
af: Rosel-Solis, Manuel-Javier
Udgivet: (2019)

Additive manufacturing: Fused deposition modeling advances
af: Aguilar Duque, Julian Israel
Udgivet: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
af: Balderrama Armendariz, Cesar Omar
Udgivet: (2019)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
af: Arias-Nava, Elias H.
Udgivet: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
af: Arias-Nava, Elias H.
Udgivet: (2018)

On Properties of Torsional Metric Spaces
af: Trejo, Hector
Udgivet: (2018)

LABRADOR HEMBRA CON DISTENSIÓN Y DOLOR ABDOMINAL
af: V. Alonso, et al.
Udgivet: (2018)

Weibull S-N Fatigue Strength Curve Analysis for A572 Gr. 50 Steel, Based on the True Stress—True Strain Approach
af: Piña Monarrez, Manuel Román
Udgivet: (2020)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Udgivet: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
af: Maximino Matus Ruiz
Udgivet: (2023)

Electrochemical behavior of Zn‐REP nanohybrid coatings during marine Shewanella sp. biofilm formation
af: Galicia, Monica
Udgivet: (2021)

Weibull analysis for normal/accelerated and fatigue random vibration test
af: Piña Monarrez, Manuel Román
Udgivet: (2019)

The effectiveness of published continuum constitutive laws to predict stress-assisted densification of powder compacts
af: Camacho Montes, Hector
Udgivet: (2022)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
af: Garza-Hernández, R.
Udgivet: (2019)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
af: Castro Carmona, Javier Servando
Udgivet: (2020)

Probabilistic Linear Time-Dependent Stress Beam Analysis and Its Stress-Strength Reliability
af: Piña Monarrez, Manuel Román
Udgivet: (2021)

Impact of job strain and being overweight on middle and senior managers from the manufacturing sector in the Mexican industry
Udgivet: (2021)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
af: Becerril-Silva, M.
Udgivet: (2018)

Weibull Analysis for Constant and Variant Stress Behavior Using the Alt Method for Single Stress and the Taguchi Method for Several Stress Variables
af: Piña Monarrez, Manuel Román
Udgivet: (2018)

Effects of Job Content and Physical Activity on Body Mass Index among Obese Managers of the Mexican Manufacturing Industry
Udgivet: (2020)

Mechanical design of a low-cost ABS hand prosthesis using the finite element method
Udgivet: (2021)

The squirrel-cage induction motor model and its parameter identification via steady and dynamic tests
af: Morfín, Onofre
Udgivet: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Udgivet: (2020)

Water conservation potential of modified turf grass irrigation in urban parks of Phoenix, Arizona
Udgivet: (2022)

A comparison between the Functional Analysis and the Causal-Loop Diagram to model inventive problems
af: Delgado Maciel, Jesus
Udgivet: (2018)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Udgivet: (2021)

Lean-Sigma for product improvement using the VoC for enhancing the product competitiveness
af: Alba-Baena, Noé
Udgivet: (2019)

Reliability analysis for DC motors under voltage step-stress scenario
af: Mendez Gonzalez, Luis Carlos
Udgivet: (2020)

Development of a descriptive study of work stress, physical activity, eating habits and obesity in the maquiladora industry using software applications
Udgivet: (2020)

Application of the COHRV Conceptual Framework to Enhance Sustainable Manufacturing
af: Riosvelasco, Georgina Elizabeth
Udgivet: (2022)

Stress-strength Weibull analysis with different shape parameter B and probabilistic safety factor
af: Piña Monarrez, Manuel Román
Udgivet: (2020)

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Udgivet: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Udgivet: (2020)

Acute Exercise Effect on Glomerular Filtration in the Elderly
af: Ramos Jimenez, Arnulfo
Udgivet: (2020)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
af: Mota, Maria de la Luz
Udgivet: (2021)

Estimation of the lifespan distribution of gold nanoparticles stabilized with lipoic acid by accelerated degradation tests and wiener process
af: Cornejo Monroy, Delfino
Udgivet: (2022)

Lean Manufacturing Critical Success Factors for the Transportation Equipment Manufacturing Industry in Mexico
Udgivet: (2020)

Mental health effects on workers returning to work during the Covid-19 pandemic. An analysis of the maquiladora industry in northern Mexico
af: Máynez Guaderrama, Aurora
Udgivet: (2022)

Psychological distress and lack of PINK1 promote bioenergetics alterations in peripheral blood mononuclear cells
af: Martinez-Martinez, Alejandro
Udgivet: (2020)

PILOT TEST OF AN INSTRUMENT FOR THE ASSESSMENT OF MOBBING, BURNOUT, JOB PERFORMANCE AND OCCUPATIONAL PERFORMANCE IN ADMINISTRATIVE PERSONNEL OF THE MAQUILADORA INDUSTRY
Udgivet: (2022)