Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

Nowadays, fuse deposition modeling is a growing fabrication technology for developing new products. When using plastics, these processes present various challenges related to fusion distribution, fuse deposition paths, part orientation, and layer thickness among others. The problem is increased ho...

Mô tả đầy đủ

Đã lưu trong:

Chi tiết về thư mục
Tác giả chính:	Arias-Nava, Elias H.
Tác giả khác:	Méndez-González, Luis Carlos, Rodríguez-Picón, Luis Alberto, Diaz Mendoza, Juan Miguel, Delia valles, Julieta
Định dạng:	Artículo
Ngôn ngữ:	en_US
Được phát hành:	2018
Những chủ đề:	3D printing additive manufacturing fuse deposition modeling mechanical properties wood plastic composites info:eu-repo/classification/cti/7
Truy cập trực tuyến:	https://doi.org/10.5281/zenodo.1247027 http://www.ijesrt.com/issues%20pdf%20file/Archive-2018/May-2018/40.pdf
Các nhãn:	Thêm thẻ Không có thẻ, Là người đầu tiên thẻ bản ghi này!

Những quyển sách tương tự

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Bằng: Arias-Nava, Elias H.
Được phát hành: (2018)

Additive manufacturing: Fused deposition modeling advances
Bằng: Aguilar Duque, Julian Israel
Được phát hành: (2018)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
Bằng: Rosel-Solis, Manuel-Javier
Được phát hành: (2019)

Torsion analysis of the anisotropic behavior of FDM technology
Bằng: Balderrama Armendariz, Cesar Omar
Được phát hành: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
Bằng: Balderrama Armendariz, Cesar Omar
Được phát hành: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Được phát hành: (2020)

Evaluation of adjustable functionality and mechanical properties of a transradial mechanical prosthesis for 3D printing
Bằng: Paola Lizeth Orquiz Avila, et al.
Được phát hành: (2024)

Geometric considerations for the 3D printing of components using fused filament fabrication
Được phát hành: (2020)

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction
Được phát hành: (2024)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
Bằng: Castro Carmona, Javier Servando
Được phát hành: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
Bằng: Maximino Matus Ruiz
Được phát hành: (2023)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Được phát hành: (2021)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Được phát hành: (2021)

Analysis of mechanical and electrical imperfect contacts in piezoelectric composites
Bằng: López Realpozo, Juan Carlos
Được phát hành: (2018)

Antibacterial Properties of Grape Seed Extract-Enriched Cellulose Hydrogels for Potential Dental Application: In Vitro Assay, Cytocompatibility, and Biocompatibility
Bằng: Tovar Carrillo, Karla Lizette
Được phát hành: (2024)

Semi-analytic finite element method applied to short-fiber-reinforced piezoelectric composites
Được phát hành: (2021)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
Bằng: Garza-Hernández, R.
Được phát hành: (2019)

Self-locking module for automatic tool change
Bằng: Dr. Carlos Sánchez López, et al.
Được phát hành: (2024)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Được phát hành: (2021)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Được phát hành: (2022)

Effective Properties of Micropolar Laminated Media Under the Influence of Constitutive Property Rotation
Bằng: Espinosa-Almeyda, Yoanh
Được phát hành: (2024)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
Bằng: Flores‑Hernández, Cynthia G.
Được phát hành: (2018)

Interphase effect on the effective magneto-electro-elastic properties for three-phase fib er-reinforce d composites by a semi-analytical approach
Được phát hành: (2020)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Được phát hành: (2020)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Được phát hành: (2021)

Determination of the life cycle of electrical fuses: 7CP24-17
Bằng: Omar Rosales Rivera, et al.
Được phát hành: (2024)

Evaluation of the plastic injection machine maintenance system through the TOPSIS method
Bằng: Calvillo, Jesús Manuel
Được phát hành: (2019)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Được phát hành: (2021)

Influence of post‑deposition annealing on the chemical states of crystalline tantalum pentoxide films
Bằng: Perez, Israel
Được phát hành: (2018)

Scorpion venoms and associated toxins as anticancer agents: update on their application and mechanism of action.
Bằng: Rivas Caceres, Raymundo Rene
Được phát hành: (2020)

Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution
Bằng: Piña Monarrez, Manuel Román
Được phát hành: (2020)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
Bằng: Becerril-Silva, M.
Được phát hành: (2018)

Determination of the Chemical Composition of Lithium Niobate Powders
Bằng: Sanchez Dena, Oswaldo
Được phát hành: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
Bằng: Mota , Maria de la Luz
Được phát hành: (2019)

Articulated mechanism in aerial robots for cargo transport: 7CP24-23
Bằng: Héctor Aarón Mani Lazos, et al.
Được phát hành: (2024)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Được phát hành: (2020)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
Bằng: Valero Galván, José
Được phát hành: (2018)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
Bằng: Universidad Autónoma de Ciudad Juárez, et al.
Được phát hành: (2023)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
Bằng: Olivas Armendariz, Imelda
Được phát hành: (2022)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material for orthodontic applications
Được phát hành: (2024)