Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

Nowadays, fuse deposition modeling is a growing fabrication technology for developing new products. When using plastics, these processes present various challenges related to fusion distribution, fuse deposition paths, part orientation, and layer thickness among others. The problem is increased ho...

Kaydedildi:

Detaylı Bibliyografya
Yazar:	Arias-Nava, Elias H.
Diğer Yazarlar:	Méndez-González, Luis Carlos, Rodríguez-Picón, Luis Alberto, Diaz Mendoza, Juan Miguel, Delia valles, Julieta
Materyal Türü:	Artículo
Dil:	en_US
Baskı/Yayın Bilgisi:	2018
Konular:	3D printing additive manufacturing fuse deposition modeling mechanical properties wood plastic composites info:eu-repo/classification/cti/7
Online Erişim:	https://doi.org/10.5281/zenodo.1247027 http://www.ijesrt.com/issues%20pdf%20file/Archive-2018/May-2018/40.pdf
Etiketler:	Etiketle Etiket eklenmemiş, İlk siz ekleyin!

Benzer Materyaller

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Yazar:: Arias-Nava, Elias H.
Baskı/Yayın Bilgisi: (2018)

Additive manufacturing: Fused deposition modeling advances
Yazar:: Aguilar Duque, Julian Israel
Baskı/Yayın Bilgisi: (2018)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
Yazar:: Rosel-Solis, Manuel-Javier
Baskı/Yayın Bilgisi: (2019)

Torsion analysis of the anisotropic behavior of FDM technology
Yazar:: Balderrama Armendariz, Cesar Omar
Baskı/Yayın Bilgisi: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
Yazar:: Balderrama Armendariz, Cesar Omar
Baskı/Yayın Bilgisi: (2019)

Geometric considerations for the 3D printing of components using fused filament fabrication
Baskı/Yayın Bilgisi: (2020)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Baskı/Yayın Bilgisi: (2021)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Baskı/Yayın Bilgisi: (2020)

Evaluation of Mechanical and Thermophysical Properties of Chitosan/Poly(DL-Lactide-co-Glycolide)/Multiwalled Carbon Nanotubes for Tissue Engineering
Yazar:: olivas, imelda, ve diğerleri
Baskı/Yayın Bilgisi: (2017)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
Yazar:: Castro Carmona, Javier Servando
Baskı/Yayın Bilgisi: (2020)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Baskı/Yayın Bilgisi: (2022)

Analysis of mechanical and electrical imperfect contacts in piezoelectric composites
Yazar:: López Realpozo, Juan Carlos
Baskı/Yayın Bilgisi: (2018)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
Yazar:: Flores‑Hernández, Cynthia G.
Baskı/Yayın Bilgisi: (2018)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Baskı/Yayın Bilgisi: (2021)

Interphase effect on the effective magneto-electro-elastic properties for three-phase fib er-reinforce d composites by a semi-analytical approach
Baskı/Yayın Bilgisi: (2020)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Baskı/Yayın Bilgisi: (2021)

Semi-analytic finite element method applied to short-fiber-reinforced piezoelectric composites
Baskı/Yayın Bilgisi: (2021)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
Yazar:: Maximino Matus Ruiz
Baskı/Yayın Bilgisi: (2023)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
Yazar:: Garza-Hernández, R.
Baskı/Yayın Bilgisi: (2019)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Baskı/Yayın Bilgisi: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Baskı/Yayın Bilgisi: (2020)

Effective properties of centro-symmetric micropolar composites with non-uniform imperfect contact conditions
Baskı/Yayın Bilgisi: (2023)

Influence of post‑deposition annealing on the chemical states of crystalline tantalum pentoxide films
Yazar:: Perez, Israel
Baskı/Yayın Bilgisi: (2018)

Scorpion venoms and associated toxins as anticancer agents: update on their application and mechanism of action.
Yazar:: Rivas Caceres, Raymundo Rene
Baskı/Yayın Bilgisi: (2020)

Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution
Yazar:: Piña Monarrez, Manuel Román
Baskı/Yayın Bilgisi: (2020)

Haptic Sensation of Physical Properties in an Augmented Reality Environment.
Yazar:: Rodríguez Ramírez, Alma Guadalupe
Baskı/Yayın Bilgisi: (2020)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
Yazar:: Universidad Autónoma de Ciudad Juárez, ve diğerleri
Baskı/Yayın Bilgisi: (2023)

Determination of the Chemical Composition of Lithium Niobate Powders
Yazar:: Sanchez Dena, Oswaldo
Baskı/Yayın Bilgisi: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
Yazar:: Mota , Maria de la Luz
Baskı/Yayın Bilgisi: (2019)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Baskı/Yayın Bilgisi: (2020)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
Yazar:: Valero Galván, José
Baskı/Yayın Bilgisi: (2018)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
Yazar:: Becerril-Silva, M.
Baskı/Yayın Bilgisi: (2018)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
Yazar:: Olivas Armendariz, Imelda
Baskı/Yayın Bilgisi: (2022)

High Hydration Factor in Older Hispanic-American Adults: Possible Implications for Accurate Body Composition Estimates
Baskı/Yayın Bilgisi: (2020)

Antimicrobial and Substantivity Properties of Silver Nanoparticles against Oral Microbiomes Clinically Isolated from Young and Young-Adult Patients
Yazar:: Espinosa Cristobal, Leon Francisco
Baskı/Yayın Bilgisi: (2019)

Brosimum alicastrum Sw. (Ramón): An Alternative to Improve the Nutritional Properties and Functional Potential of the Wheat Flour Tortilla
Yazar:: Subiria-Cueto, Rodrigo
Baskı/Yayın Bilgisi: (2019)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Baskı/Yayın Bilgisi: (2021)

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite
Baskı/Yayın Bilgisi: (2022)

Differences in Body Composition in Older People from Two Regions of Mexico: Implications for Diagnoses of Sarcopenia and Sarcopenic Obesity
Yazar:: Rangel Peniche, Diana Beatriz
Baskı/Yayın Bilgisi: (2018)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
Yazar:: Núñez-Gastélum, José Alberto
Baskı/Yayın Bilgisi: (2018)