Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites

Nowadays, fuse deposition modeling is a growing fabrication technology for developing new products. When using plastics, these processes present various challenges related to fusion distribution, fuse deposition paths, part orientation, and layer thickness among others. The problem is increased ho...

Полное описание

Сохранить в:

Библиографические подробности
Главный автор:	Arias-Nava, Elias H.
Другие авторы:	Méndez-González, Luis Carlos, Rodríguez-Picón, Luis Alberto, Diaz Mendoza, Juan Miguel, Delia valles, Julieta
Формат:	Artículo
Язык:	en_US
Опубликовано:	2018
Предметы:	3D printing additive manufacturing fuse deposition modeling mechanical properties wood plastic composites info:eu-repo/classification/cti/7
Online-ссылка:	https://doi.org/10.5281/zenodo.1247027 http://www.ijesrt.com/issues%20pdf%20file/Archive-2018/May-2018/40.pdf
Метки:	Добавить метку Нет меток, Требуется 1-ая метка записи!

Схожие документы

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
по: Arias-Nava, Elias H.
Опубликовано: (2018)

Additive manufacturing: Fused deposition modeling advances
по: Aguilar Duque, Julian Israel
Опубликовано: (2018)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
по: Rosel-Solis, Manuel-Javier
Опубликовано: (2019)

Torsion analysis of the anisotropic behavior of FDM technology
по: Balderrama Armendariz, Cesar Omar
Опубликовано: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
по: Balderrama Armendariz, Cesar Omar
Опубликовано: (2019)

Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
Опубликовано: (2020)

Evaluation of adjustable functionality and mechanical properties of a transradial mechanical prosthesis for 3D printing
по: Paola Lizeth Orquiz Avila, et al.
Опубликовано: (2024)

Geometric considerations for the 3D printing of components using fused filament fabrication
Опубликовано: (2020)

Analysis of micropolar elastic multi-laminated composite and its application to bioceramic materials for bone reconstruction
Опубликовано: (2024)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
по: Castro Carmona, Javier Servando
Опубликовано: (2020)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
по: Maximino Matus Ruiz
Опубликовано: (2023)

Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells
Опубликовано: (2021)

Resolution in the 3D modeling of objects for additive manufacturing and reverse engineering–shutter effect
Опубликовано: (2021)

Analysis of mechanical and electrical imperfect contacts in piezoelectric composites
по: López Realpozo, Juan Carlos
Опубликовано: (2018)

Antibacterial Properties of Grape Seed Extract-Enriched Cellulose Hydrogels for Potential Dental Application: In Vitro Assay, Cytocompatibility, and Biocompatibility
по: Tovar Carrillo, Karla Lizette
Опубликовано: (2024)

Semi-analytic finite element method applied to short-fiber-reinforced piezoelectric composites
Опубликовано: (2021)

In-situ X-ray photoelectron spectroscopy analysis of the initial growth of CdS thin films by chemical bath deposition
по: Garza-Hernández, R.
Опубликовано: (2019)

Self-locking module for automatic tool change
по: Dr. Carlos Sánchez López, et al.
Опубликовано: (2024)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Опубликовано: (2021)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Опубликовано: (2022)

Effective Properties of Micropolar Laminated Media Under the Influence of Constitutive Property Rotation
по: Espinosa-Almeyda, Yoanh
Опубликовано: (2024)

Chitosan–Starch–Keratin Composites: Improving Thermo-Mechanical and Degradation Properties Through Chemical Modification
по: Flores‑Hernández, Cynthia G.
Опубликовано: (2018)

Interphase effect on the effective magneto-electro-elastic properties for three-phase fib er-reinforce d composites by a semi-analytical approach
Опубликовано: (2020)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Опубликовано: (2020)

Effect of Streptococcus mutans on surface-topography, microhardness, and mechanical properties of contemporary resin composites
Опубликовано: (2021)

Determination of the life cycle of electrical fuses: 7CP24-17
по: Omar Rosales Rivera, et al.
Опубликовано: (2024)

Evaluation of the plastic injection machine maintenance system through the TOPSIS method
по: Calvillo, Jesús Manuel
Опубликовано: (2019)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Опубликовано: (2021)

Influence of post‑deposition annealing on the chemical states of crystalline tantalum pentoxide films
по: Perez, Israel
Опубликовано: (2018)

Scorpion venoms and associated toxins as anticancer agents: update on their application and mechanism of action.
по: Rivas Caceres, Raymundo Rene
Опубликовано: (2020)

Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution
по: Piña Monarrez, Manuel Román
Опубликовано: (2020)

Airy pattern on narrow photoluminescence spectrum of band to band recombination in CdTe: Te thin films
по: Becerril-Silva, M.
Опубликовано: (2018)

Determination of the Chemical Composition of Lithium Niobate Powders
по: Sanchez Dena, Oswaldo
Опубликовано: (2019)

Synthesis and Novel Purification Process of PANI and PANI/AgNPs Composite
по: Mota , Maria de la Luz
Опубликовано: (2019)

Articulated mechanism in aerial robots for cargo transport: 7CP24-23
по: Héctor Aarón Mani Lazos, et al.
Опубликовано: (2024)

Synergism in novel silver-copper/hydroxyapatite composites for increased antibacterial activity and biocompatibility
Опубликовано: (2020)

Morphological characteristics, chemical composition and antioxidant activity of seeds by four wild Opuntia species from North of Mexico
по: Valero Galván, José
Опубликовано: (2018)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
по: Universidad Autónoma de Ciudad Juárez, et al.
Опубликовано: (2023)

Composite scaffolds of chitosan/polycaprolactone functionalized with protein of Mytilus californiensis for bone tissue regeneration
по: Olivas Armendariz, Imelda
Опубликовано: (2022)

Synthesis of a 45S5 bioactive glass cementitious resin bonded composite material for orthodontic applications
Опубликовано: (2024)