Tetracycline adsorption on steam alternative activated carbon: kinetic and thermodynamic parameters
Water pollution by emerging pollutants, such as antibiotics like tetracycline (TC), is a worldwide environmental problem. To eliminate TC from water, the present study used an advanced water treatment technology (sorption) that has shown a very good relation between cost and effectiveness. To deve...
Сохранить в:
| Главный автор: | |
|---|---|
| Другие авторы: | , |
| Формат: | Artículo |
| Язык: | spa |
| Опубликовано: |
2018
|
| Предметы: | |
| Online-ссылка: | https://doi.org/10.5004/dwt.2018.22313 http://www.deswater.com/DWT_abstracts/vol_114/114_2018_307.pdf |
| Метки: |
Добавить метку
Нет меток, Требуется 1-ая метка записи!
|
| Итог: | Water pollution by emerging pollutants, such as antibiotics like tetracycline (TC), is a worldwide environmental
problem. To eliminate TC from water, the present study used an advanced water treatment
technology (sorption) that has shown a very good relation between cost and effectiveness. To develop
a sustainable and cheap activated carbon with acceptable sorption capacity for TC removal, it was
proved a friendly environmental activation by using an agricultural waste like alternative precursor:
pecan nut shells and water-like activating agent. Four different materials were used for the sorption
test: pecan nut shell carbonised and water activated (NAC-850), commercial activated carbon as reference
(GAC), and both materials were modified with citric acid (NAC-850-mod and GAC-mod). All
the materials were characterised by SBET, scanning electron microscopy, energy-dispersive X-ray and
Fourier transform infrared. It was calculated that the sorption equilibrium time for the TC, kinetic
parameters for pseudo-first-order, pseudo-second-order and Elovich models; the sorption isotherms
for Langmuir, Freundlich and Temkin and thermodynamic parameters (ΔH, ΔS, ΔG and Ea) also were
applied. It evaluated the effect of pH and temperature and the presence of competitive ions in the
aqueous media. The prepared activated carbons that showed the best sorption capacity were those that
followed a citric acid activation. The kinetics experiments fitted to pseudo-second-order equation and
to isotherm Freundlich model. The efficiency to remove the TC increased with the modification of the
surface with citric acid between 5% and 11%. The activation/modification method applied is simple
and economical and improves the TC sorption capacity that is equivalent to the removal efficiencies of
commercial activated carbons. |
|---|