Reduction of Setup Times in a Metal Fabrication Company Using a Lean-Sigma Approach

Reduction of Setup Times in a Metal Fabrication Company Using a Lean-Sigma Approach

Manufacturing companies face demand fluctuations and must deliver the required quantity of parts to their customers within the required time; however, companies face different challenges in fulfilling them. One is technological advances, which make it impossible for them to compete with other countr...

Deskribapen osoa

Gorde:

Xehetasun bibliografikoak
Beste egile batzuk:	Celis Gracia, Omar, García-Alcaraz, Jorge Luis, Estrada Orantes, Francisco Javier, Avelar, Liliana, Alba-Baena, Noé
Formatua:	Artículo
Hizkuntza:	spa
Argitaratua:	2024
Gaiak:	info:eu-repo/classification/cti/7
Sarrera elektronikoa:	http://ingenieria.ute.edu.ec/enfoqueute/index.php/revista/article/view/1027
Etiketak:	Etiketa erantsi Etiketarik gabe, Izan zaitez lehena erregistro honi etiketa jartzen!

Antzeko izenburuak

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
Argitaratua: (2020)

Use of Lean-Sigma as a Problem-Solving Method in a Restrictive Environment
nork: Alba-Baena, Noé
Argitaratua: (2018)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Argitaratua: (2021)

Using lean-sigma for the integration of two products during a ramp-up event
nork: Alba-Baena, Noé
Argitaratua: (2020)

Lean-Sigma for product improvement using the VoC for enhancing the product competitiveness
nork: Alba-Baena, Noé
Argitaratua: (2019)

Adaptability of the Lean-Sigma Methodology for Operations in a Multicultural Workplace
nork: Alba-Baena, Noé
Argitaratua: (2021)

Improving the efficiency of a production line using a PDCA approach and Lean Manufacturing: 9CP25-8
nork: Dianabel Santillán Campos, et al.
Argitaratua: (2025)

Methodology based on Lean Six Sigma to increase the sigma level of manufacturing processes: 5CP23-18
nork: Omar Celis Gracia, et al.
Argitaratua: (2023)

Multi-physics continuum modelling approaches for metal powder additive manufacturing: a review
nork: Alba-Baena, Noé
Argitaratua: (2020)

Simulation with a Lean approach in Industry 5.0 : 4CP22-36
nork: Mario Ramos Castillo, et al.
Argitaratua: (2022)

Filosofía Lean Six Sigma Caso: Empresa De La Región Lagunera
Argitaratua: (2022)

The E-Strategy for Lean-Sigma Solutions, Latin American Case Study in a New Product Validation Process
nork: Alba-Baena, Noé
Argitaratua: (2018)

Geometric considerations for the 3D printing of components using fused filament fabrication
Argitaratua: (2020)

The standard time and its importance in the quoting of manufacturing projects. A management approach
nork: Lorena Janeth Méndez Meléndez, et al.
Argitaratua: (2022)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
nork: Morelia De los Santos, et al.
Argitaratua: (2023)

A Quantitative Approach for Web Usability using Eye Tracking Data
nork: LÓPEZ-OROZCO, Francisco
Argitaratua: (2018)

Proposal Fabrication of Heterostructures for Dual Detection of Insulin and Glucose for Timely Monitoring in Diabetic Patients Based on Thin Films of Chalcogenides and Bioceramics
nork: Amanda Carrillo Castillo
Argitaratua: (2024)

Lean Supply Chain - A Bibliometric Review
nork: García-Alcaraz, Jorge Luis
Argitaratua: (2024)

Implementación de la metodología lean-sigma para la reducción de tiempos de preparación de maquinaria
nork: Alejandra Marin Sifuentes, et al.
Argitaratua: (2016)

Análisis y mejora de un proceso mediante la aplicación de un enfoque Lean Six Sigma
nork: Luis Alberto Mireles Salinas, et al.
Argitaratua: (2016)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Argitaratua: (2021)

Prediction of time series using wavelet Gaussian process for wireless sensor networks
nork: Mejia, Jose
Argitaratua: (2020)

Development of an optimization method based on the steepest ascent or descent trajectory, with a stochastic approach and time adaptive drifts: 4CP22-14
nork: Paulo Eduardo García Nava, et al.
Argitaratua: (2022)

The DMAIC methodology as a tool for process improvement: the case of a mexican maquiladora company
Argitaratua: (2021)

Aplicación de la metodología Lean-Sigma en la solución de problemas en procesos de manufactura: Caso de Estudio
nork: Omar Celis Gracia, et al.
Argitaratua: (2016)

A Finite-Time Nonlinear PID Set-Point Controller for a Parallel Manipulator
nork: Salas, Francisco
Argitaratua: (2018)

Implementación de la metodología Lean Sigma en un proceso de ensamble de engranes y cadenas: Caso de estudio
nork: Omar Celis Gracia, et al.
Argitaratua: (2022)

Effects of Lean Healthcare on Patient Flow: A Systematic Review
Argitaratua: (2020)

Aluminium oxide formation via atomic layer deposition using a polymer brush mediated selective infiltration approach
Argitaratua: (2020)

Removal of chromium and lead from heavy metal contaminated water using a species of microalgae from the state of Chihuahua: 7CP24-12
nork: Diana Laura Valencia García, et al.
Argitaratua: (2024)

Optimization of the WCS and TCS process setup on three-axis CNC machining centers with artificial intelligence algorithms: 4CP22-1
nork: Manuel Meraz Méndez, et al.
Argitaratua: (2022)

A company of mexican infantry=Infantería mexicana /

A critical revision of literature on the financial analysis of companies
nork: Salvador Aníval Ochoa Ramírez, et al.
Argitaratua: (2021)

Metodología para el mejoramiento continuo de procesos de manufactura, basado en lean sigma y aplicada al proceso de elaboración de arneses automotrices
nork: Miriam Idalí De la Cruz Rodríguez, et al.
Argitaratua: (2016)

Inventory Control by ABC Method for a Transport Company: Systemic Analysis by Families
nork: Dra. Paula Rosalinda Antonio Vidaña, et al.
Argitaratua: (2023)

Reduction of Stresses and Mass of an Engine Rubber Mount Subject to Mechanical Vibrations
nork: Davalos Ramirez, Jose Omar
Argitaratua: (2021)

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing
nork: Balderrama Armendariz, Cesar Omar
Argitaratua: (2024)

Contrasting bean analysis system based on YOLOv5 and a neural network model using the interval type-2 fuzzy set approach
Argitaratua: (2024)

Design of a discrete-time controller for nonlinear systems
nork: Miguel Hernández González
Argitaratua: (2024)

Comparison of Assistive Orthopedic Products using the Pugh Matrix. A Universal Design and Ergonomics Approach
nork: Alana Rosa López, et al.
Argitaratua: (2021)