Influence of Rare Earths Additions on the Microstructure and Hardness of Heat-treated Nanostructured Superalloy Inconel 718

Influence of Rare Earths Additions on the Microstructure and Hardness of Heat-treated Nanostructured Superalloy Inconel 718

The superalloy Inconel 718 is greatly employed in high-temperature applications due to its principal characteristics: high resistance to oxidation and excellent mechanical performance at elevated temperatures; hence, its main uses are in aeronautics and aerospace engines, nuclear power generation an...

Shranjeno v:

Bibliografske podrobnosti
Drugi avtorji:	Medrano Prieto, Hansel Manuel, Castro Carmona, Javier Servando, Camacho Montes, Hector, Santos Beltran, Audel, Garay Reyes, Carlos Gamaliel, Rodríguez Cabriales, Gustavo, Ruiz Esparza Rodríguez, Marco Antonio, Estrada Guel, Ivanovich, Martínez Sánchez, Roberto
Format:	Artículo
Jezik:	en_US
Izdano:	2022
Teme:	Hardness Heat-treatments Superalloy Inconel 718 info:eu-repo/classification/cti/7
Online dostop:	https://doi.org/10.1017/S1431927622010728 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/influence-of-rare-earths-additions-on-the-microstructure-and-hardness-of-heattreated-nanostructured-superalloy-inconel-718/CD3738CC8AA2A8298FD1FA3F178C3EF9
Oznake:	Označite Brez oznak, prvi označite!

Podobne knjige/članki

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Izdano: (2021)

Comparative Microstructural study of Inconel 625 used to turbochargers
od: Ordoñez Casanova, Elsa Gabriela
Izdano: (2021)

Polyestyrene and low density polyethylene oregano’s essential oil functionalization for possible antimicrobial active packaging applications
od: Díaz-Acosta, Edgar
Izdano: (2018)

Impact of carbon nanotubes in a CrFeMnNiTi alloy proposed as a potential candidate for stainless-steel substitution
od: Hernandez Castro, Z
Izdano: (2019)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
od: Garay Reyes, Carlos Gamaliel
Izdano: (2019)

Polyestyrene and Low Density Polyethylene Oregano´s Essential Oil Functionalization for Possible Antimicrobial Active Packaging Applications
od: Díaz-Acosta, Edgar
Izdano: (2018)

Pancreatic Cancer Treatment by Nab-Paclitaxel with Gemcitabine Combination
od: Chapa, Christian
Izdano: (2022)

pH-responsive polymer micelles for methotrexate delivery at tumor microenvironments
od: Castro Carmona, Javier Servando
Izdano: (2020)

With all their earthly possessions /

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Izdano: (2021)

Equilibrium, kinetic and optimization studies for the adsorption of tartrazine in water onto activated carbon from pecan nut shells
od: Torres-Pérez, Jonatan
Izdano: (2018)

Comparison between Allura Red dye discoloration by activated carbon and azo bacteria strain
Izdano: (2020)

Synthesis of nanostructured Nickel compounds on conductive metallicsubstrates
od: Portillo, J.G.
Izdano: (2019)

Replacement of electric resistive space heating by an air-source heat pump in a residential application. Environmental amortization
od: Latorre-Biel, Juan-Ignacio
Izdano: (2018)

Antiadherence and Antimicrobial Properties of Silver Nanoparticles against Streptococcus mutans on Brackets and Wires Used for Orthodontic Treatments
od: Espinosa Cristóbal, León Francisco
Izdano: (2018)

Effect of physiological fluid on the photothermal properties of gold nanostructured
Izdano: (2023)

Metaheuristic-based optimization of treated water distribution in a Mexican City
od: Alvarado Amaya, Osvaldo
Izdano: (2018)

Metaheuristic-based optimization of treated water distribution in a Mexican City
od: Alvarado, Osvaldo
Izdano: (2018)

Hyalinizing clear cell carcinoma-a rare entity in the oral cavity: A case report
od: Donohue-Cornejo, Alejandro
Izdano: (2020)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
od: Castro Carmona, Javier Servando
Izdano: (2020)

Two‑stage optimization of Allura direct red dye removal by treated peanut hull waste
od: Torres Perez, Jonatan
Izdano: (2020)

Structural transformation of vanadate nanotubes into vanadate oxides nanostructures during the dry reforming of methane
od: Oton, Lais F.
Izdano: (2019)

Bio-inspired guidance method for a soft landing on a Near-Earth Asteroid
od: Valenzuela Najera, Rene Alberto
Izdano: (2020)

Effect on Microstructure and Nanoindentation of a AlCoFeMoNi High Entropy Alloy
od: Baldenebro-Lopez, Francisco
Izdano: (2018)

Conferencia “Beyond Nickelbase Superalloys: Do we have options for novel metallic materials for ultrahigh temperature structural applications?”. Cátedra Douglas D. Osheroff 2019.
od: Universidad Autónoma de Ciudad Juárez.
Izdano: (2021)

Turbulent cylinder-stirred flow heat and momentum transfer research in batch operated single-phase square reactor
Izdano: (2022)

Microstructural defects in AISI 4000 series steel subjected to a 3% NaCl corrosion process.
od: Ordoñez Casanova, Elsa Gabriela
Izdano: (2021)

Effect of follicular replacement (GnRH) and bovine somatotropin (bST) on the fertility of dairy cows exposed to heat stress
Izdano: (2020)

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite
Izdano: (2022)

Uso de GPS para ubicación de empleados de una compañía de mensajería interpretado en Google Earth
od: Delgado Andrade, Silvia Alejandra, et al.
Izdano: (2017)

Uso de GPS para ubicación de empleados de una compañía de mensajería interpretado en Google Earth
od: Delgado Andrade, Silvia Alejandra, et al.
Izdano: (2017)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
od: Mota, Maria de la Luz
Izdano: (2021)

Mejora del diseño de una fixtura de una máquina de heat staking, por medio del análisis de elemento finito.
od: Nájera León, Luis Antonio
Izdano: (2022)