Influence of Rare Earths Additions on the Microstructure and Hardness of Heat-treated Nanostructured Superalloy Inconel 718

Influence of Rare Earths Additions on the Microstructure and Hardness of Heat-treated Nanostructured Superalloy Inconel 718

The superalloy Inconel 718 is greatly employed in high-temperature applications due to its principal characteristics: high resistance to oxidation and excellent mechanical performance at elevated temperatures; hence, its main uses are in aeronautics and aerospace engines, nuclear power generation an...

Полное описание

Сохранить в:

Библиографические подробности
Другие авторы:	Medrano Prieto, Hansel Manuel, Castro Carmona, Javier Servando, Camacho Montes, Hector, Santos Beltran, Audel, Garay Reyes, Carlos Gamaliel, Rodríguez Cabriales, Gustavo, Ruiz Esparza Rodríguez, Marco Antonio, Estrada Guel, Ivanovich, Martínez Sánchez, Roberto
Формат:	Artículo
Язык:	en_US
Опубликовано:	2022
Предметы:	Hardness Heat-treatments Superalloy Inconel 718 info:eu-repo/classification/cti/7
Online-ссылка:	https://doi.org/10.1017/S1431927622010728 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/influence-of-rare-earths-additions-on-the-microstructure-and-hardness-of-heattreated-nanostructured-superalloy-inconel-718/CD3738CC8AA2A8298FD1FA3F178C3EF9
Метки:	Добавить метку Нет меток, Требуется 1-ая метка записи!

Схожие документы

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Опубликовано: (2021)

Comparative Microstructural study of Inconel 625 used to turbochargers
по: Ordoñez Casanova, Elsa Gabriela
Опубликовано: (2021)

Polyestyrene and low density polyethylene oregano’s essential oil functionalization for possible antimicrobial active packaging applications
по: Díaz-Acosta, Edgar
Опубликовано: (2018)

Impact of carbon nanotubes in a CrFeMnNiTi alloy proposed as a potential candidate for stainless-steel substitution
по: Hernandez Castro, Z
Опубликовано: (2019)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
по: Garay Reyes, Carlos Gamaliel
Опубликовано: (2019)

Polyestyrene and Low Density Polyethylene Oregano´s Essential Oil Functionalization for Possible Antimicrobial Active Packaging Applications
по: Díaz-Acosta, Edgar
Опубликовано: (2018)

Pancreatic Cancer Treatment by Nab-Paclitaxel with Gemcitabine Combination
по: Chapa, Christian
Опубликовано: (2022)

pH-responsive polymer micelles for methotrexate delivery at tumor microenvironments
по: Castro Carmona, Javier Servando
Опубликовано: (2020)

With all their earthly possessions /

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Опубликовано: (2021)

Equilibrium, kinetic and optimization studies for the adsorption of tartrazine in water onto activated carbon from pecan nut shells
по: Torres-Pérez, Jonatan
Опубликовано: (2018)

Comparison between Allura Red dye discoloration by activated carbon and azo bacteria strain
Опубликовано: (2020)

Synthesis of nanostructured Nickel compounds on conductive metallicsubstrates
по: Portillo, J.G.
Опубликовано: (2019)

Replacement of electric resistive space heating by an air-source heat pump in a residential application. Environmental amortization
по: Latorre-Biel, Juan-Ignacio
Опубликовано: (2018)

Antiadherence and Antimicrobial Properties of Silver Nanoparticles against Streptococcus mutans on Brackets and Wires Used for Orthodontic Treatments
по: Espinosa Cristóbal, León Francisco
Опубликовано: (2018)

Effect of physiological fluid on the photothermal properties of gold nanostructured
Опубликовано: (2023)

Metaheuristic-based optimization of treated water distribution in a Mexican City
по: Alvarado Amaya, Osvaldo
Опубликовано: (2018)

Metaheuristic-based optimization of treated water distribution in a Mexican City
по: Alvarado, Osvaldo
Опубликовано: (2018)

Hyalinizing clear cell carcinoma-a rare entity in the oral cavity: A case report
по: Donohue-Cornejo, Alejandro
Опубликовано: (2020)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
по: Castro Carmona, Javier Servando
Опубликовано: (2020)

Two‑stage optimization of Allura direct red dye removal by treated peanut hull waste
по: Torres Perez, Jonatan
Опубликовано: (2020)

Structural transformation of vanadate nanotubes into vanadate oxides nanostructures during the dry reforming of methane
по: Oton, Lais F.
Опубликовано: (2019)

Bio-inspired guidance method for a soft landing on a Near-Earth Asteroid
по: Valenzuela Najera, Rene Alberto
Опубликовано: (2020)

Effect on Microstructure and Nanoindentation of a AlCoFeMoNi High Entropy Alloy
по: Baldenebro-Lopez, Francisco
Опубликовано: (2018)

Conferencia “Beyond Nickelbase Superalloys: Do we have options for novel metallic materials for ultrahigh temperature structural applications?”. Cátedra Douglas D. Osheroff 2019.
по: Universidad Autónoma de Ciudad Juárez.
Опубликовано: (2021)

Turbulent cylinder-stirred flow heat and momentum transfer research in batch operated single-phase square reactor
Опубликовано: (2022)

Microstructural defects in AISI 4000 series steel subjected to a 3% NaCl corrosion process.
по: Ordoñez Casanova, Elsa Gabriela
Опубликовано: (2021)

Effect of follicular replacement (GnRH) and bovine somatotropin (bST) on the fertility of dairy cows exposed to heat stress
Опубликовано: (2020)

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite
Опубликовано: (2022)

Uso de GPS para ubicación de empleados de una compañía de mensajería interpretado en Google Earth
по: Delgado Andrade, Silvia Alejandra, et al.
Опубликовано: (2017)

Uso de GPS para ubicación de empleados de una compañía de mensajería interpretado en Google Earth
по: Delgado Andrade, Silvia Alejandra, et al.
Опубликовано: (2017)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
по: Mota, Maria de la Luz
Опубликовано: (2021)

Mejora del diseño de una fixtura de una máquina de heat staking, por medio del análisis de elemento finito.
по: Nájera León, Luis Antonio
Опубликовано: (2022)