Influence of Rare Earths Additions on the Microstructure and Hardness of Heat-treated Nanostructured Superalloy Inconel 718

Influence of Rare Earths Additions on the Microstructure and Hardness of Heat-treated Nanostructured Superalloy Inconel 718

The superalloy Inconel 718 is greatly employed in high-temperature applications due to its principal characteristics: high resistance to oxidation and excellent mechanical performance at elevated temperatures; hence, its main uses are in aeronautics and aerospace engines, nuclear power generation an...

Volledige beschrijving

Bewaard in:

Bibliografische gegevens
Andere auteurs:	Medrano Prieto, Hansel Manuel, Castro Carmona, Javier Servando, Camacho Montes, Hector, Santos Beltran, Audel, Garay Reyes, Carlos Gamaliel, Rodríguez Cabriales, Gustavo, Ruiz Esparza Rodríguez, Marco Antonio, Estrada Guel, Ivanovich, Martínez Sánchez, Roberto
Formaat:	Artículo
Taal:	en_US
Gepubliceerd in:	2022
Onderwerpen:	Hardness Heat-treatments Superalloy Inconel 718 info:eu-repo/classification/cti/7
Online toegang:	https://doi.org/10.1017/S1431927622010728 https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/influence-of-rare-earths-additions-on-the-microstructure-and-hardness-of-heattreated-nanostructured-superalloy-inconel-718/CD3738CC8AA2A8298FD1FA3F178C3EF9
Tags:	Voeg label toe Geen labels, Wees de eerste die dit record labelt!

Gelijkaardige items

Effect of Hot Isostatic Pressing and Rare-Earth Elements Addition on the Microstructure and Hardness on Inconel 718
Gepubliceerd in: (2021)

Comparative Microstructural study of Inconel 625 used to turbochargers
door: Ordoñez Casanova, Elsa Gabriela
Gepubliceerd in: (2021)

Polyestyrene and low density polyethylene oregano’s essential oil functionalization for possible antimicrobial active packaging applications
door: Díaz-Acosta, Edgar
Gepubliceerd in: (2018)

Impact of carbon nanotubes in a CrFeMnNiTi alloy proposed as a potential candidate for stainless-steel substitution
door: Hernandez Castro, Z
Gepubliceerd in: (2019)

Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
door: Garay Reyes, Carlos Gamaliel
Gepubliceerd in: (2019)

Polyestyrene and Low Density Polyethylene Oregano´s Essential Oil Functionalization for Possible Antimicrobial Active Packaging Applications
door: Díaz-Acosta, Edgar
Gepubliceerd in: (2018)

Pancreatic Cancer Treatment by Nab-Paclitaxel with Gemcitabine Combination
door: Chapa, Christian
Gepubliceerd in: (2022)

pH-responsive polymer micelles for methotrexate delivery at tumor microenvironments
door: Castro Carmona, Javier Servando
Gepubliceerd in: (2020)

With all their earthly possessions /

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Gepubliceerd in: (2021)

Equilibrium, kinetic and optimization studies for the adsorption of tartrazine in water onto activated carbon from pecan nut shells
door: Torres-Pérez, Jonatan
Gepubliceerd in: (2018)

Comparison between Allura Red dye discoloration by activated carbon and azo bacteria strain
Gepubliceerd in: (2020)

Synthesis of nanostructured Nickel compounds on conductive metallicsubstrates
door: Portillo, J.G.
Gepubliceerd in: (2019)

Replacement of electric resistive space heating by an air-source heat pump in a residential application. Environmental amortization
door: Latorre-Biel, Juan-Ignacio
Gepubliceerd in: (2018)

Antiadherence and Antimicrobial Properties of Silver Nanoparticles against Streptococcus mutans on Brackets and Wires Used for Orthodontic Treatments
door: Espinosa Cristóbal, León Francisco
Gepubliceerd in: (2018)

Effect of physiological fluid on the photothermal properties of gold nanostructured
Gepubliceerd in: (2023)

Metaheuristic-based optimization of treated water distribution in a Mexican City
door: Alvarado Amaya, Osvaldo
Gepubliceerd in: (2018)

Metaheuristic-based optimization of treated water distribution in a Mexican City
door: Alvarado, Osvaldo
Gepubliceerd in: (2018)

Hyalinizing clear cell carcinoma-a rare entity in the oral cavity: A case report
door: Donohue-Cornejo, Alejandro
Gepubliceerd in: (2020)

Effect of Ni additions and hot deformation on precipitation behavior and hardness in AleSieMg aged alloys
door: Castro Carmona, Javier Servando
Gepubliceerd in: (2020)

Two‑stage optimization of Allura direct red dye removal by treated peanut hull waste
door: Torres Perez, Jonatan
Gepubliceerd in: (2020)

Structural transformation of vanadate nanotubes into vanadate oxides nanostructures during the dry reforming of methane
door: Oton, Lais F.
Gepubliceerd in: (2019)

Bio-inspired guidance method for a soft landing on a Near-Earth Asteroid
door: Valenzuela Najera, Rene Alberto
Gepubliceerd in: (2020)

Effect on Microstructure and Nanoindentation of a AlCoFeMoNi High Entropy Alloy
door: Baldenebro-Lopez, Francisco
Gepubliceerd in: (2018)

Conferencia “Beyond Nickelbase Superalloys: Do we have options for novel metallic materials for ultrahigh temperature structural applications?”. Cátedra Douglas D. Osheroff 2019.
door: Universidad Autónoma de Ciudad Juárez.
Gepubliceerd in: (2021)

Turbulent cylinder-stirred flow heat and momentum transfer research in batch operated single-phase square reactor
Gepubliceerd in: (2022)

Microstructural defects in AISI 4000 series steel subjected to a 3% NaCl corrosion process.
door: Ordoñez Casanova, Elsa Gabriela
Gepubliceerd in: (2021)

Effect of follicular replacement (GnRH) and bovine somatotropin (bST) on the fertility of dairy cows exposed to heat stress
Gepubliceerd in: (2020)

Microstructure, Mechanical Properties and Tribological Behavior of A380/Nano-Hexagonal Boron Nitride Metal Matrix Composite
Gepubliceerd in: (2022)

Uso de GPS para ubicación de empleados de una compañía de mensajería interpretado en Google Earth
door: Delgado Andrade, Silvia Alejandra, et al.
Gepubliceerd in: (2017)

Uso de GPS para ubicación de empleados de una compañía de mensajería interpretado en Google Earth
door: Delgado Andrade, Silvia Alejandra, et al.
Gepubliceerd in: (2017)

Optical and microstructural characteristics of CuO thin films by sol gel process and introducing in non-enzymatic glucose biosensor applications
door: Mota, Maria de la Luz
Gepubliceerd in: (2021)

Mejora del diseño de una fixtura de una máquina de heat staking, por medio del análisis de elemento finito.
door: Nájera León, Luis Antonio
Gepubliceerd in: (2022)