Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Fused Filament Fabrication is an Additive Manufacturing technology that is continuously improving its technologies. The present research exposes the use of the Travel Salesman Problem and Nearest Neighbor Algorithm as a strategy to reduce the time need to print slots shield in a Printed Circuit Boar...

Mô tả đầy đủ

Đã lưu trong:

Chi tiết về thư mục
Tác giả khác:	Aguilar Duque, Julián Israel, Avelar, Liliana, Balderrama Armendariz, Cesar Omar, Hernandez Arellano, Juan Luis
Định dạng:	Artículo
Ngôn ngữ:	en_US
Được phát hành:	2020
Những chủ đề:	Fused Filament Fabrication Travel Salesman Problem Nearest Neighbor Algorithm time reduction process PCB board. info:eu-repo/classification/cti/7
Truy cập trực tuyến:	https://www.ijcopi.org/ojs/article/view/156
Các nhãn:	Thêm thẻ Không có thẻ, Là người đầu tiên thẻ bản ghi này!

Những quyển sách tương tự

Geometric considerations for the 3D printing of components using fused filament fabrication
Được phát hành: (2020)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Được phát hành: (2021)

Trend Boards. Nuevas Tendencias en el Diseño de Interiores
Bằng: Licenciatura en Diseño de Interiores, Instituto de Arquitectura, Diseño y Arte
Được phát hành: (2017)

Using Regression Models for Predicting the Product Quality in a Tubing Extrusion Process
Bằng: Garcia, Vicente
Được phát hành: (2019)

Additive manufacturing: Fused deposition modeling advances
Bằng: Aguilar Duque, Julian Israel
Được phát hành: (2018)

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing
Bằng: Balderrama Armendariz, Cesar Omar
Được phát hành: (2024)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Bằng: Arias-Nava, Elias H.
Được phát hành: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
Bằng: Arias-Nava, Elias H.
Được phát hành: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
Bằng: Balderrama Armendariz, Cesar Omar
Được phát hành: (2019)

Determination of the life cycle of electrical fuses: 7CP24-17
Bằng: Omar Rosales Rivera, et al.
Được phát hành: (2024)

A regression model based on the nearest centroid neighborhood
Bằng: Garcia, Vicente
Được phát hành: (2018)

Torsion analysis of the anisotropic behavior of FDM technology
Bằng: Balderrama Armendariz, Cesar Omar
Được phát hành: (2018)

From bululú to varieté. Approach to the travelling theaters (repertory and varieties) in the twentieth-century Spain
Bằng: Juan José Montijano Ruiz
Được phát hành: (2021)

Implementation of Kaizen methodology to solve problems in the supply chain: 7CP24-36
Bằng: Ing. Luis Fernando Peñúñuri Trejo, et al.
Được phát hành: (2024)

Success factors to promote the effectiveness of Circular Economy 4.0 of the industrial sector in plastic manufacturers at Ciudad Juárez
Bằng: Francisco Arturo Bribiescas Silva, et al.
Được phát hành: (2024)

“Reducción del tiempo de impresión en impresora 3D que utiliza tecnología de deposición de filamento fundido”
Bằng: Ramos Lozano, Secundino
Được phát hành: (2020)

Metaheuristics for Order Picking Optimisation: A Comparison Among Three Swarm-Intelligence Algorithms
Bằng: Rivera Zarate, Gilberto
Được phát hành: (2021)

Reducción de desperdicio en proceso de fabricación de faro automotriz
Bằng: M. C. Fuentes, et al.
Được phát hành: (2021)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
Bằng: Rosel-Solis, Manuel-Javier
Được phát hành: (2019)

Development of a semi-automated induction soldering workstation: 7CP24-20
Bằng: Ing. Alma Nayeli Balcázar Terrones, et al.
Được phát hành: (2024)

Porous bioactive TPU system fabricated by 3D printing, containing Lavandula angustifolia essential oil and neomycin for the regeneration of diabetic foot wounds: 9CP25-18
Bằng: Jazmín Arely Piña González, et al.
Được phát hành: (2025)

Reduction of Setup Times in a Metal Fabrication Company Using a Lean-Sigma Approach
Được phát hành: (2024)

In-circuit electrical test system with direct interface and machine learning algorithms : 9CP25-4
Bằng: Geu Misael Puentes, et al.
Được phát hành: (2025)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
Bằng: Morelia De los Santos, et al.
Được phát hành: (2023)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
Bằng: Universidad Autónoma de Ciudad Juárez, et al.
Được phát hành: (2023)

Conferencia (WEBINAR) Conversatorios de Gestión del Talento 2023 (La importancia del Global OnBoarding ).
Bằng: Departamento Ciencias Administrativas, et al.
Được phát hành: (2023)

La necesidad de pre-prints en las ciencias jurídicas
Bằng: Nava, Wendolyne
Được phát hành: (2021)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Được phát hành: (2022)

Sistema de visión industrial para piezas en procesos con dispositivo móvil o single board computer: Revisión de literatura
Bằng: Alanís Pérez, Arturo Heriberto
Được phát hành: (2018)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
Bằng: Maximino Matus Ruiz
Được phát hành: (2023)

Evaluation of adjustable functionality and mechanical properties of a transradial mechanical prosthesis for 3D printing
Bằng: Paola Lizeth Orquiz Avila, et al.
Được phát hành: (2024)

A Hierarchical Axiomatic Evaluation of Additive Manufacturing Equipment and the 3D Printing Process Based on Sustainability and Human Factors
Được phát hành: (2024)

Proposal Fabrication of Heterostructures for Dual Detection of Insulin and Glucose for Timely Monitoring in Diabetic Patients Based on Thin Films of Chalcogenides and Bioceramics
Bằng: Amanda Carrillo Castillo
Được phát hành: (2024)

Computational model of the 3D printing process by extrusion of complex 3D constructs of the gelatin/siloxane material: 9CP25-6
Bằng: Marcos Bryan Valenzuela Reyes, et al.
Được phát hành: (2025)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Được phát hành: (2021)

Precise Definition of a “Monolayer Point” in Polymer Brush Films for Fabricating Highly Coherent TiO2 Thin Films by Vapor-Phase Infiltration
Được phát hành: (2020)

3D printed TPU mesh system with Lavandula angustifolia essential oil and neomycin for diabetic foot wound regeneration: 7CP24-30
Bằng: Jazmín Arely Piña González, et al.
Được phát hành: (2024)

Solvent- and Catalyst-Free One-Pot Green Bound-Type Fused Bis-Heterocycles Synthesis via Groebke–Blackburn–Bienaymé Reaction/SNAr/Ring-Chain Azido-Tautomerization Strategy
Bằng: Gámez-Montaño, Rocio
Được phát hành: (2018)

Reduction of Stresses and Mass of an Engine Rubber Mount Subject to Mechanical Vibrations
Bằng: Davalos Ramirez, Jose Omar
Được phát hành: (2021)

Stress concentration reduction in an axially loaded rectangular bar with an elliptical hole
Bằng: José Alfredo Ramírez Monares, et al.
Được phát hành: (2023)