Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Fused Filament Fabrication is an Additive Manufacturing technology that is continuously improving its technologies. The present research exposes the use of the Travel Salesman Problem and Nearest Neighbor Algorithm as a strategy to reduce the time need to print slots shield in a Printed Circuit Boar...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Andre forfattere:	Aguilar Duque, Julián Israel, Avelar, Liliana, Balderrama Armendariz, Cesar Omar, Hernandez Arellano, Juan Luis
Format:	Artículo
Sprog:	en_US
Udgivet:	2020
Fag:	Fused Filament Fabrication Travel Salesman Problem Nearest Neighbor Algorithm time reduction process PCB board. info:eu-repo/classification/cti/7
Online adgang:	https://www.ijcopi.org/ojs/article/view/156
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Geometric considerations for the 3D printing of components using fused filament fabrication
Udgivet: (2020)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Udgivet: (2021)

Trend Boards. Nuevas Tendencias en el Diseño de Interiores
af: Licenciatura en Diseño de Interiores, Instituto de Arquitectura, Diseño y Arte
Udgivet: (2017)

Using Regression Models for Predicting the Product Quality in a Tubing Extrusion Process
af: Garcia, Vicente
Udgivet: (2019)

Additive manufacturing: Fused deposition modeling advances
af: Aguilar Duque, Julian Israel
Udgivet: (2018)

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing
af: Balderrama Armendariz, Cesar Omar
Udgivet: (2024)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
af: Arias-Nava, Elias H.
Udgivet: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
af: Arias-Nava, Elias H.
Udgivet: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
af: Balderrama Armendariz, Cesar Omar
Udgivet: (2019)

Determination of the life cycle of electrical fuses: 7CP24-17
af: Omar Rosales Rivera, et al.
Udgivet: (2024)

A regression model based on the nearest centroid neighborhood
af: Garcia, Vicente
Udgivet: (2018)

Torsion analysis of the anisotropic behavior of FDM technology
af: Balderrama Armendariz, Cesar Omar
Udgivet: (2018)

From bululú to varieté. Approach to the travelling theaters (repertory and varieties) in the twentieth-century Spain
af: Juan José Montijano Ruiz
Udgivet: (2021)

Implementation of Kaizen methodology to solve problems in the supply chain: 7CP24-36
af: Ing. Luis Fernando Peñúñuri Trejo, et al.
Udgivet: (2024)

Success factors to promote the effectiveness of Circular Economy 4.0 of the industrial sector in plastic manufacturers at Ciudad Juárez
af: Francisco Arturo Bribiescas Silva, et al.
Udgivet: (2024)

“Reducción del tiempo de impresión en impresora 3D que utiliza tecnología de deposición de filamento fundido”
af: Ramos Lozano, Secundino
Udgivet: (2020)

Metaheuristics for Order Picking Optimisation: A Comparison Among Three Swarm-Intelligence Algorithms
af: Rivera Zarate, Gilberto
Udgivet: (2021)

Reducción de desperdicio en proceso de fabricación de faro automotriz
af: M. C. Fuentes, et al.
Udgivet: (2021)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
af: Rosel-Solis, Manuel-Javier
Udgivet: (2019)

Development of a semi-automated induction soldering workstation: 7CP24-20
af: Ing. Alma Nayeli Balcázar Terrones, et al.
Udgivet: (2024)

Porous bioactive TPU system fabricated by 3D printing, containing Lavandula angustifolia essential oil and neomycin for the regeneration of diabetic foot wounds: 9CP25-18
af: Jazmín Arely Piña González, et al.
Udgivet: (2025)

Reduction of Setup Times in a Metal Fabrication Company Using a Lean-Sigma Approach
Udgivet: (2024)

In-circuit electrical test system with direct interface and machine learning algorithms : 9CP25-4
af: Geu Misael Puentes, et al.
Udgivet: (2025)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
af: Morelia De los Santos, et al.
Udgivet: (2023)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
af: Universidad Autónoma de Ciudad Juárez, et al.
Udgivet: (2023)

Conferencia (WEBINAR) Conversatorios de Gestión del Talento 2023 (La importancia del Global OnBoarding ).
af: Departamento Ciencias Administrativas, et al.
Udgivet: (2023)

La necesidad de pre-prints en las ciencias jurídicas
af: Nava, Wendolyne
Udgivet: (2021)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Udgivet: (2022)

Sistema de visión industrial para piezas en procesos con dispositivo móvil o single board computer: Revisión de literatura
af: Alanís Pérez, Arturo Heriberto
Udgivet: (2018)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
af: Maximino Matus Ruiz
Udgivet: (2023)

Evaluation of adjustable functionality and mechanical properties of a transradial mechanical prosthesis for 3D printing
af: Paola Lizeth Orquiz Avila, et al.
Udgivet: (2024)

A Hierarchical Axiomatic Evaluation of Additive Manufacturing Equipment and the 3D Printing Process Based on Sustainability and Human Factors
Udgivet: (2024)

Proposal Fabrication of Heterostructures for Dual Detection of Insulin and Glucose for Timely Monitoring in Diabetic Patients Based on Thin Films of Chalcogenides and Bioceramics
af: Amanda Carrillo Castillo
Udgivet: (2024)

Computational model of the 3D printing process by extrusion of complex 3D constructs of the gelatin/siloxane material: 9CP25-6
af: Marcos Bryan Valenzuela Reyes, et al.
Udgivet: (2025)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Udgivet: (2021)

Precise Definition of a “Monolayer Point” in Polymer Brush Films for Fabricating Highly Coherent TiO2 Thin Films by Vapor-Phase Infiltration
Udgivet: (2020)

3D printed TPU mesh system with Lavandula angustifolia essential oil and neomycin for diabetic foot wound regeneration: 7CP24-30
af: Jazmín Arely Piña González, et al.
Udgivet: (2024)

Solvent- and Catalyst-Free One-Pot Green Bound-Type Fused Bis-Heterocycles Synthesis via Groebke–Blackburn–Bienaymé Reaction/SNAr/Ring-Chain Azido-Tautomerization Strategy
af: Gámez-Montaño, Rocio
Udgivet: (2018)

Reduction of Stresses and Mass of an Engine Rubber Mount Subject to Mechanical Vibrations
af: Davalos Ramirez, Jose Omar
Udgivet: (2021)

Stress concentration reduction in an axially loaded rectangular bar with an elliptical hole
af: José Alfredo Ramírez Monares, et al.
Udgivet: (2023)