Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Fused Filament Fabrication is an Additive Manufacturing technology that is continuously improving its technologies. The present research exposes the use of the Travel Salesman Problem and Nearest Neighbor Algorithm as a strategy to reduce the time need to print slots shield in a Printed Circuit Boar...

Disgrifiad llawn

Wedi'i Gadw mewn:

Manylion Llyfryddiaeth
Awduron Eraill:	Aguilar Duque, Julián Israel, Avelar, Liliana, Balderrama Armendariz, Cesar Omar, Hernandez Arellano, Juan Luis
Fformat:	Artículo
Iaith:	en_US
Cyhoeddwyd:	2020
Pynciau:	Fused Filament Fabrication Travel Salesman Problem Nearest Neighbor Algorithm time reduction process PCB board. info:eu-repo/classification/cti/7
Mynediad Ar-lein:	https://www.ijcopi.org/ojs/article/view/156
Tagiau:	Ychwanegu Tag Dim Tagiau, Byddwch y cyntaf i dagio'r cofnod hwn!

Eitemau Tebyg

Geometric considerations for the 3D printing of components using fused filament fabrication
Cyhoeddwyd: (2020)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Cyhoeddwyd: (2021)

Trend Boards. Nuevas Tendencias en el Diseño de Interiores
gan: Licenciatura en Diseño de Interiores, Instituto de Arquitectura, Diseño y Arte
Cyhoeddwyd: (2017)

Using Regression Models for Predicting the Product Quality in a Tubing Extrusion Process
gan: Garcia, Vicente
Cyhoeddwyd: (2019)

Additive manufacturing: Fused deposition modeling advances
gan: Aguilar Duque, Julian Israel
Cyhoeddwyd: (2018)

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing
gan: Balderrama Armendariz, Cesar Omar
Cyhoeddwyd: (2024)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
gan: Arias-Nava, Elias H.
Cyhoeddwyd: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
gan: Arias-Nava, Elias H.
Cyhoeddwyd: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
gan: Balderrama Armendariz, Cesar Omar
Cyhoeddwyd: (2019)

Determination of the life cycle of electrical fuses: 7CP24-17
gan: Omar Rosales Rivera, et al.
Cyhoeddwyd: (2024)

A regression model based on the nearest centroid neighborhood
gan: Garcia, Vicente
Cyhoeddwyd: (2018)

Torsion analysis of the anisotropic behavior of FDM technology
gan: Balderrama Armendariz, Cesar Omar
Cyhoeddwyd: (2018)

From bululú to varieté. Approach to the travelling theaters (repertory and varieties) in the twentieth-century Spain
gan: Juan José Montijano Ruiz
Cyhoeddwyd: (2021)

Implementation of Kaizen methodology to solve problems in the supply chain: 7CP24-36
gan: Ing. Luis Fernando Peñúñuri Trejo, et al.
Cyhoeddwyd: (2024)

Success factors to promote the effectiveness of Circular Economy 4.0 of the industrial sector in plastic manufacturers at Ciudad Juárez
gan: Francisco Arturo Bribiescas Silva, et al.
Cyhoeddwyd: (2024)

“Reducción del tiempo de impresión en impresora 3D que utiliza tecnología de deposición de filamento fundido”
gan: Ramos Lozano, Secundino
Cyhoeddwyd: (2020)

Metaheuristics for Order Picking Optimisation: A Comparison Among Three Swarm-Intelligence Algorithms
gan: Rivera Zarate, Gilberto
Cyhoeddwyd: (2021)

Reducción de desperdicio en proceso de fabricación de faro automotriz
gan: M. C. Fuentes, et al.
Cyhoeddwyd: (2021)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
gan: Rosel-Solis, Manuel-Javier
Cyhoeddwyd: (2019)

Development of a semi-automated induction soldering workstation: 7CP24-20
gan: Ing. Alma Nayeli Balcázar Terrones, et al.
Cyhoeddwyd: (2024)

Porous bioactive TPU system fabricated by 3D printing, containing Lavandula angustifolia essential oil and neomycin for the regeneration of diabetic foot wounds: 9CP25-18
gan: Jazmín Arely Piña González, et al.
Cyhoeddwyd: (2025)

Reduction of Setup Times in a Metal Fabrication Company Using a Lean-Sigma Approach
Cyhoeddwyd: (2024)

In-circuit electrical test system with direct interface and machine learning algorithms : 9CP25-4
gan: Geu Misael Puentes, et al.
Cyhoeddwyd: (2025)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
gan: Morelia De los Santos, et al.
Cyhoeddwyd: (2023)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
gan: Universidad Autónoma de Ciudad Juárez, et al.
Cyhoeddwyd: (2023)

Conferencia (WEBINAR) Conversatorios de Gestión del Talento 2023 (La importancia del Global OnBoarding ).
gan: Departamento Ciencias Administrativas, et al.
Cyhoeddwyd: (2023)

La necesidad de pre-prints en las ciencias jurídicas
gan: Nava, Wendolyne
Cyhoeddwyd: (2021)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Cyhoeddwyd: (2022)

Sistema de visión industrial para piezas en procesos con dispositivo móvil o single board computer: Revisión de literatura
gan: Alanís Pérez, Arturo Heriberto
Cyhoeddwyd: (2018)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
gan: Maximino Matus Ruiz
Cyhoeddwyd: (2023)

Evaluation of adjustable functionality and mechanical properties of a transradial mechanical prosthesis for 3D printing
gan: Paola Lizeth Orquiz Avila, et al.
Cyhoeddwyd: (2024)

A Hierarchical Axiomatic Evaluation of Additive Manufacturing Equipment and the 3D Printing Process Based on Sustainability and Human Factors
Cyhoeddwyd: (2024)

Proposal Fabrication of Heterostructures for Dual Detection of Insulin and Glucose for Timely Monitoring in Diabetic Patients Based on Thin Films of Chalcogenides and Bioceramics
gan: Amanda Carrillo Castillo
Cyhoeddwyd: (2024)

Computational model of the 3D printing process by extrusion of complex 3D constructs of the gelatin/siloxane material: 9CP25-6
gan: Marcos Bryan Valenzuela Reyes, et al.
Cyhoeddwyd: (2025)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Cyhoeddwyd: (2021)

Precise Definition of a “Monolayer Point” in Polymer Brush Films for Fabricating Highly Coherent TiO2 Thin Films by Vapor-Phase Infiltration
Cyhoeddwyd: (2020)

3D printed TPU mesh system with Lavandula angustifolia essential oil and neomycin for diabetic foot wound regeneration: 7CP24-30
gan: Jazmín Arely Piña González, et al.
Cyhoeddwyd: (2024)

Solvent- and Catalyst-Free One-Pot Green Bound-Type Fused Bis-Heterocycles Synthesis via Groebke–Blackburn–Bienaymé Reaction/SNAr/Ring-Chain Azido-Tautomerization Strategy
gan: Gámez-Montaño, Rocio
Cyhoeddwyd: (2018)

Reduction of Stresses and Mass of an Engine Rubber Mount Subject to Mechanical Vibrations
gan: Davalos Ramirez, Jose Omar
Cyhoeddwyd: (2021)

Stress concentration reduction in an axially loaded rectangular bar with an elliptical hole
gan: José Alfredo Ramírez Monares, et al.
Cyhoeddwyd: (2023)