Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots

Fused Filament Fabrication is an Additive Manufacturing technology that is continuously improving its technologies. The present research exposes the use of the Travel Salesman Problem and Nearest Neighbor Algorithm as a strategy to reduce the time need to print slots shield in a Printed Circuit Boar...

Descripció completa

Guardat en:

Dades bibliogràfiques
Altres autors:	Aguilar Duque, Julián Israel, Avelar, Liliana, Balderrama Armendariz, Cesar Omar, Hernandez Arellano, Juan Luis
Format:	Artículo
Idioma:	en_US
Publicat:	2020
Matèries:	Fused Filament Fabrication Travel Salesman Problem Nearest Neighbor Algorithm time reduction process PCB board. info:eu-repo/classification/cti/7
Accés en línia:	https://www.ijcopi.org/ojs/article/view/156
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

Geometric considerations for the 3D printing of components using fused filament fabrication
Publicat: (2020)

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
Publicat: (2021)

Trend Boards. Nuevas Tendencias en el Diseño de Interiores
per: Licenciatura en Diseño de Interiores, Instituto de Arquitectura, Diseño y Arte
Publicat: (2017)

Using Regression Models for Predicting the Product Quality in a Tubing Extrusion Process
per: Garcia, Vicente
Publicat: (2019)

Additive manufacturing: Fused deposition modeling advances
per: Aguilar Duque, Julian Israel
Publicat: (2018)

Square nozzle to improve mechanical performance and density in fused filament Fabrication additive manufacturing
per: Balderrama Armendariz, Cesar Omar
Publicat: (2024)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
per: Arias-Nava, Elias H.
Publicat: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
per: Arias-Nava, Elias H.
Publicat: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
per: Balderrama Armendariz, Cesar Omar
Publicat: (2019)

Determination of the life cycle of electrical fuses: 7CP24-17
per: Omar Rosales Rivera, et al.
Publicat: (2024)

A regression model based on the nearest centroid neighborhood
per: Garcia, Vicente
Publicat: (2018)

Torsion analysis of the anisotropic behavior of FDM technology
per: Balderrama Armendariz, Cesar Omar
Publicat: (2018)

From bululú to varieté. Approach to the travelling theaters (repertory and varieties) in the twentieth-century Spain
per: Juan José Montijano Ruiz
Publicat: (2021)

Implementation of Kaizen methodology to solve problems in the supply chain: 7CP24-36
per: Ing. Luis Fernando Peñúñuri Trejo, et al.
Publicat: (2024)

Success factors to promote the effectiveness of Circular Economy 4.0 of the industrial sector in plastic manufacturers at Ciudad Juárez
per: Francisco Arturo Bribiescas Silva, et al.
Publicat: (2024)

“Reducción del tiempo de impresión en impresora 3D que utiliza tecnología de deposición de filamento fundido”
per: Ramos Lozano, Secundino
Publicat: (2020)

Metaheuristics for Order Picking Optimisation: A Comparison Among Three Swarm-Intelligence Algorithms
per: Rivera Zarate, Gilberto
Publicat: (2021)

Reducción de desperdicio en proceso de fabricación de faro automotriz
per: M. C. Fuentes, et al.
Publicat: (2021)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
per: Rosel-Solis, Manuel-Javier
Publicat: (2019)

Development of a semi-automated induction soldering workstation: 7CP24-20
per: Ing. Alma Nayeli Balcázar Terrones, et al.
Publicat: (2024)

Porous bioactive TPU system fabricated by 3D printing, containing Lavandula angustifolia essential oil and neomycin for the regeneration of diabetic foot wounds: 9CP25-18
per: Jazmín Arely Piña González, et al.
Publicat: (2025)

Reduction of Setup Times in a Metal Fabrication Company Using a Lean-Sigma Approach
Publicat: (2024)

In-circuit electrical test system with direct interface and machine learning algorithms : 9CP25-4
per: Geu Misael Puentes, et al.
Publicat: (2025)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
per: Morelia De los Santos, et al.
Publicat: (2023)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
per: Universidad Autónoma de Ciudad Juárez, et al.
Publicat: (2023)

Conferencia (WEBINAR) Conversatorios de Gestión del Talento 2023 (La importancia del Global OnBoarding ).
per: Departamento Ciencias Administrativas, et al.
Publicat: (2023)

La necesidad de pre-prints en las ciencias jurídicas
per: Nava, Wendolyne
Publicat: (2021)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Publicat: (2022)

Sistema de visión industrial para piezas en procesos con dispositivo móvil o single board computer: Revisión de literatura
per: Alanís Pérez, Arturo Heriberto
Publicat: (2018)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
per: Maximino Matus Ruiz
Publicat: (2023)

Evaluation of adjustable functionality and mechanical properties of a transradial mechanical prosthesis for 3D printing
per: Paola Lizeth Orquiz Avila, et al.
Publicat: (2024)

A Hierarchical Axiomatic Evaluation of Additive Manufacturing Equipment and the 3D Printing Process Based on Sustainability and Human Factors
Publicat: (2024)

Proposal Fabrication of Heterostructures for Dual Detection of Insulin and Glucose for Timely Monitoring in Diabetic Patients Based on Thin Films of Chalcogenides and Bioceramics
per: Amanda Carrillo Castillo
Publicat: (2024)

Computational model of the 3D printing process by extrusion of complex 3D constructs of the gelatin/siloxane material: 9CP25-6
per: Marcos Bryan Valenzuela Reyes, et al.
Publicat: (2025)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
Publicat: (2021)

Precise Definition of a “Monolayer Point” in Polymer Brush Films for Fabricating Highly Coherent TiO2 Thin Films by Vapor-Phase Infiltration
Publicat: (2020)

3D printed TPU mesh system with Lavandula angustifolia essential oil and neomycin for diabetic foot wound regeneration: 7CP24-30
per: Jazmín Arely Piña González, et al.
Publicat: (2024)

Solvent- and Catalyst-Free One-Pot Green Bound-Type Fused Bis-Heterocycles Synthesis via Groebke–Blackburn–Bienaymé Reaction/SNAr/Ring-Chain Azido-Tautomerization Strategy
per: Gámez-Montaño, Rocio
Publicat: (2018)

Reduction of Stresses and Mass of an Engine Rubber Mount Subject to Mechanical Vibrations
per: Davalos Ramirez, Jose Omar
Publicat: (2021)

Stress concentration reduction in an axially loaded rectangular bar with an elliptical hole
per: José Alfredo Ramírez Monares, et al.
Publicat: (2023)