Geometric considerations for the 3D printing of components using fused filament fabrication

Geometric considerations for the 3D printing of components using fused filament fabrication

Demand in 3D printing products using fused filament fabrication (FFF) in industry has been growth a lot with 55% in development of prototypes, 43% in production, and 41% in conceptual models for testing. However, information regarding the manufacturing considerations of geometry-restricted component...

पूर्ण विवरण

में बचाया:

ग्रंथसूची विवरण
अन्य लेखक:	Aguilar Duque, Julian Israel, García-Alcaraz, Jorge Luis, Hernandez Arellano, Juan Luis
स्वरूप:	Artículo
भाषा:	English
प्रकाशित:	2020
विषय:	Fused filament fabrication Geometric components Printing defects info:eu-repo/classification/cti/7
ऑनलाइन पहुंच:	https://link.springer.com/article/10.1007/s00170-020-05523-3 https://link.springer.com/article/10.1007/s00170-020-05523-3
टैग :	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
प्रकाशित: (2021)

Reduction of the Fused Filament Fabrication Process Time in the Manufacturing of Printed Circuit Board Slots
प्रकाशित: (2020)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
द्वारा: Arias-Nava, Elias H.
प्रकाशित: (2018)

Effect analysis of fuse deposition modeling processes on mechanical properties of wood plastic composites
द्वारा: Arias-Nava, Elias H.
प्रकाशित: (2018)

Folding behavior of thermoplastic hinges fabricated with polymer extrusion additive manufacturing
द्वारा: Balderrama Armendariz, Cesar Omar
प्रकाशित: (2019)

Additive manufacturing: Fused deposition modeling advances
द्वारा: Aguilar Duque, Julian Israel
प्रकाशित: (2018)

A Mobile Augmented Reality Framework Based on Reusable Components
द्वारा: Cruz Sanchez, Vianey Guadalupe
प्रकाशित: (2017)

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
प्रकाशित: (2022)

Self-Learning Geometric Transformations: A Framework for the “Before and After” Style of Exercises
द्वारा: Gonzalez Campos, Jose Saul
प्रकाशित: (2022)

Mesa 4: Grafica Fronteriza y Ciudad: Pan and prints.
द्वारा: Universidad Autónoma de Ciudad Juárez, और अन्य
प्रकाशित: (2023)

Socio-technological responses to COVID-19 in Mexico: Spin-offs, repositories and 3D printing
द्वारा: Maximino Matus Ruiz
प्रकाशित: (2023)

Agricultural furrow irrigation inefficiency in the basin of the Laguna de Bustillos, Chihuahua, Mexico: geometric characteristics of agricultural plots and aquifer depletion
द्वारा: Alatorre Cejudo, Luis Carlos
प्रकाशित: (2019)

“Reducción del tiempo de impresión en impresora 3D que utiliza tecnología de deposición de filamento fundido”
द्वारा: Ramos Lozano, Secundino
प्रकाशित: (2020)

Molecular identifcation and morphological variations of Dermacentor albipictus collected from two deer species in northern Mexico
द्वारा: Escarcega Avila, Angelica Maria
प्रकाशित: (2021)

Lithium Niobate Single Crystals and Powders Reviewed—Part II
द्वारा: Farias, Rurik
प्रकाशित: (2020)

Gastrointestinal metabolism of monomeric and polymeric polyphenols from mango (Mangifera indica L.) bagasse under simulated conditions
प्रकाशित: (2021)

Torsion analysis of the anisotropic behavior of FDM technology
द्वारा: Balderrama Armendariz, Cesar Omar
प्रकाशित: (2018)

An unsupervised approach for traffic trace sanitization based on the entropy spaces
द्वारा: Gonzalez-Landaeta, Rafael
प्रकाशित: (2017)

Analysis of Characteristics of Composite Materials Built On ABS Cores Prepared By Additive Manufacturing
द्वारा: Rosel-Solis, Manuel-Javier
प्रकाशित: (2019)

Methodological considerations and historical context of savings and older adults in Mexico
द्वारा: David Vázquez Guzmán, और अन्य
प्रकाशित: (2021)

Defective Arbitration Clause. Truncated Commercial Arbitration
द्वारा: Juan Manuel Saldaña Pérez
प्रकाशित: (2024)

Design and fabrication of a bioreactor for the proliferation of mesenchymal stem cells
द्वारा: Morelia De los Santos, और अन्य
प्रकाशित: (2023)

La necesidad de pre-prints en las ciencias jurídicas
द्वारा: Nava, Wendolyne
प्रकाशित: (2021)

An experimental study on mechanical properties and wear of A380/nB4C composites fabricated using two different liquid state processes
प्रकाशित: (2021)

Bioactive components and health effects of pecan nuts and their by-products: a review
द्वारा: Alvarez-Parrilla, Emilio
प्रकाशित: (2018)

Late-onset seizures secondary to cerebellar tuberculosis. A case report and considerations about tuberculosis in Mexico
द्वारा: Luis Javier Casanova Cardiel, और अन्य
प्रकाशित: (2022)

An Order-Picking Model Associated With Hospital Components and Solved by a Firefly Algorithm
द्वारा: Alor, Alan
प्रकाशित: (2019)

Two practical cases of tariff classification that generated conflict in the Customs of Ciudad Juarez, Chihuahua during the COVID-2019 pandemic.
द्वारा: Brenda Berenice Delfín Aguilar, और अन्य
प्रकाशित: (2022)

Determination of fat-free mass density and its components in older Hispanic adults by in vivo methods
प्रकाशित: (2021)

Precise Definition of a “Monolayer Point” in Polymer Brush Films for Fabricating Highly Coherent TiO2 Thin Films by Vapor-Phase Infiltration
प्रकाशित: (2020)

Single-input, multiple-output iterative algorithm for the volume, area, elevation, and shape calculation using 3D topobathymetric models
द्वारा: Rojas Villalobos, Hugo Luis
प्रकाशित: (2020)

Zacatenco, D.F. /

Zacatenco, D.F. /

México, D.F. : Chapultepec /

México, D.F. : Chapultepec /

Teatro Nacional México, D.F. = National Theatre Mexico, D.F. /

Solvent- and Catalyst-Free One-Pot Green Bound-Type Fused Bis-Heterocycles Synthesis via Groebke–Blackburn–Bienaymé Reaction/SNAr/Ring-Chain Azido-Tautomerization Strategy
द्वारा: Gámez-Montaño, Rocio
प्रकाशित: (2018)

D. Porfirio Díaz : Presidente de México /

México, D. F. : Canal de la Viga /

México, D. F. : Canal de la Viga /