Additive manufacturing of green composites: Poly (lactic acid) reinforced with keratin materials obtained from Angora rabbit hair
In this research, additive manufacturing of polylactic acid (PLA) reinforced with keratin was studied. Keratin was obtained from Angora rabbit hair and modified with NaOH. Scanning electron microscopy (SEM) images showed that the modified surfaces were rougher than untreated surfaces. Furthermore, S...
সংরক্ষণ করুন:
| অন্যান্য লেখক: | , , , , , , , |
|---|---|
| বিন্যাস: | Artículo |
| ভাষা: | spa |
| প্রকাশিত: |
2020
|
| বিষয়গুলি: | |
| অনলাইন ব্যবহার করুন: | https://doi.org/10.1002/app.50321 https://onlinelibrary.wiley.com/doi/full/10.1002/app.50321?af=R |
| ট্যাগগুলো: |
ট্যাগ যুক্ত করুন
কোনো ট্যাগ নেই, প্রথমজন হিসাবে ট্যাগ করুন!
|
| সংক্ষিপ্ত: | In this research, additive manufacturing of polylactic acid (PLA) reinforced with keratin was studied. Keratin was obtained from Angora rabbit hair and modified with NaOH. Scanning electron microscopy (SEM) images showed that the modified surfaces were rougher than untreated surfaces. Furthermore, SEM images in the composites' fracture regions showed surface changes, associated with the nature of the reinforcement. Likewise, thermomechanical properties of the composites were attributed to the nature of the reinforcement and the type of keratin. Besides, the 3D printed composites showed higher thermal conductivity values than PLA with the addition of keratin. Cytotoxicity tests revealed an improvement in cell growth compared to the control and PLA. These results are meaningful toward the development of high thermal conductors and biocompatible composites with applications in different fields, where the use of only natural polymers is necessary. |
|---|